HI Just replaced the pickup on my partners model C and it does not record any data. When she starts to row the PM5 illuminates but that is all. I have swapped over the PM5 from my D (to see if it was he PM5 that was faulty) and that is the same.. her PM5 also works with my D. Not a difficult task to fit or too teckie so cannot see what I can have done wrong.
Any ideas?
New Monitor pickup does not record data?
-
Citroen
- SpamTeam
- Posts: 8023
- Joined: March 16th, 2006, 3:28 pm
- Location: A small cave in deepest darkest Basingstoke, UK
Re: New Monitor pickup does not record data?
Is the PM5 configured for the right model?
Check the product ID page.
Check the product ID page.
-
Carl Watts
- Marathon Poster
- Posts: 4693
- Joined: January 8th, 2010, 4:35 pm
- Location: NEW ZEALAND
Re: New Monitor pickup does not record data?
Update the firmware on your monitors using the latest update utility found here.
https://www.concept2.com/service/monitors/pm5/firmware
Then this makes it very easy to change the type of rower your putting the monitor on.
From the main menu press more options>Utilities>more utilities and then select the Erg Type.
https://www.concept2.com/service/monitors/pm5/firmware
Then this makes it very easy to change the type of rower your putting the monitor on.
From the main menu press more options>Utilities>more utilities and then select the Erg Type.
Carl Watts.
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log
Re: New Monitor pickup does not record data?
My old C had a 2-wire sensor with PM3, and C2 wanted to know where the PM5 would go, when I switched.
08-1940, 179cm, 83kg.