That should work, I've even put the slides right next to each other (0 spacing) when setting up for a B and all was well. Only tried that because it was a very simple set-up guaranteeing square and aligned slides, the trivial extra bungee tension seemed to balance right out.John Rupp wrote:I suppose for the B...
The slides could be put 3 inches apart, and the erg feet put into both of the back slots on the slides.
Then the length needed for the B would be the same as for the others.
Provided that this worked okay but it should.
Update:
I moved the slides 2.75 inches apart, with the erg on the back slots.
Will try this out in the morning.
The danger with the B is that if one wasn't paying attention it could easily knock a hole in sheetrock if the slides were close enough to a wall to let it reach. The RowPerfect has this issue, it will sit in a smaller space, but still needs room to work, though the new prototype needs a bit less than the original.