We have been having a problem with several of the ergs at our club of having the metal strip on the top of the slide coming unglued.
Does anybody have any experience with this and/or good fixes?
Thanks in advance,
Heather
track coming unglued
-
Afterburner
- Paddler
- Posts: 29
- Joined: September 10th, 2006, 5:13 pm
- Location: Philadelphia, PA
- Contact:
track coming unglued
F23 5'7" Lwt
2k 7:18.5/ 6k 23:15.7/ 100k 9:07:27.7
2k 7:18.5/ 6k 23:15.7/ 100k 9:07:27.7
Hi Heather,
The best fix is to replace the tracks. It is difficult to work on the track without bending it and making it worse.
They are pretty inexpensive (under $15 ea) unless they are still covered under warranty.
You can give us a call, 800-245-5676 or send an email to rowing@concept2.com
Shawn
The best fix is to replace the tracks. It is difficult to work on the track without bending it and making it worse.
They are pretty inexpensive (under $15 ea) unless they are still covered under warranty.
You can give us a call, 800-245-5676 or send an email to rowing@concept2.com
Shawn
-
Morgan
C2 offers this at a very reasonable price. It has two long pieces of double-sided tape where it contacts the sides of the rail.
They do make TWO sizes. Somehow, I was sent the LONG one and had to cut off about 6 inches to make it work. It is stainless steel, and pretty hard to cut without a grinder and cutting wheel. If you order the rail, verify the length before you call C2.
Good luck.
They do make TWO sizes. Somehow, I was sent the LONG one and had to cut off about 6 inches to make it work. It is stainless steel, and pretty hard to cut without a grinder and cutting wheel. If you order the rail, verify the length before you call C2.
Good luck.
-
Morgan