Error 49

[old] atheist · Post by **[old] atheist** » November 2nd, 2005, 7:20 pm

hi,<br /><br />i have a pm3 on a model B; hooked into rowpro. when doing an interval workout, error "49 -x" pops up between the interval and rest phase. "x" starts out around 43, then seems to decrease as the wheel slows.<br /><br />any answers?<br /><br />thanks,<br />-steve

[old] michaelb · Post by **[old] michaelb** » November 2nd, 2005, 7:27 pm

Are you running the latest version of rowpro (1.802) and firmware on your PM3? I don't remember seeing this sort of error before. Is that a rowpro error message? Although they are slow to respond, I would post this on the DR forum too and see if someone from DR will respond.<br /><br /><a href='http://www.digitalrowing.com/default.aspx?ItemId=305' target='_blank'>Main Forum</a>

[old] atheist · Post by **[old] atheist** » November 2nd, 2005, 7:43 pm

<br /><br />i'll try the upgrades and see if it helps. it's a pm3 error message.

[old] mlyons · Post by **[old] mlyons** » November 2nd, 2005, 8:47 pm

The PM3 error 49 indicates the PM3 isn't able to save the workout to the logcard at the conclusion of the work interval (prior to the reset interval). Without know the PM3 firmware version and state of the logcard it is difficult to diagnose specifically what is happening. Answers to the following questions would help to diagnose the problem, but the proper course of action is to download the PM3 Beta Firmware Updater from the Concept2 website and upgrade your PM3. The newest firmware fixes numerous logcard related issues which could be the cause of this error.<br /><br />1. Are the workouts being logged on your logcard or do they show up in internal log memory (need to remove logcard in order to inspect internal log memory)?<br />2. Is the the logcard empty or does it have workouts logged on it?<br />3. Have you used RowPro to modify your Custom Workout list on the PM3? If so, what version of RowPro are you using?<br />4. What version of PM3 firmware are you using (check Main Menu->More->Utilities->Product ID)?<br /><br />Note that if the workouts are in internal log memory they can be copied to the logcard from the logcard utilities menu. Do this before upgrading the PM3 firmware because the internal log memory will be cleared.<br /><br />Mark

[old] atheist · Post by **[old] atheist** » November 3rd, 2005, 1:35 pm

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'><b>QUOTE(mlyons @ Nov 2 2005, 08:47 PM)</b></div></td></tr><tr><td class='quote'> The newest firmware fixes numerous logcard related issues which could be the cause of this error.<br /><br />1. Are the workouts being logged on your logcard or do they show up in internal log memory (need to remove logcard in order to inspect internal log memory)?<br />2. Is the the logcard empty or does it have workouts logged on it?<br />3. Have you used RowPro to modify your Custom Workout list on the PM3? If so, what version of RowPro are you using?<br />4. What version of PM3 firmware are you using (check Main Menu->More->Utilities->Product ID)?<br /> <br /> </td></tr></table><br /><br />thanks mark,<br /><br />pm3 firmware is current at 82. the intervals performed while the error occured were not written to the logcard; i have since transferred them. all other workouts seem to have made it onto the logcard.<br /><br />i don't believe i've used rowpro to modify my custom workout list, as i'm not quite sure what that involves. i upgraded today to the latest rowpro version; i'll post again if any errors show up. <br /><br />thanks for everyone's help!<br /><br />-steve<br /><br />

[old] mlyons · Post by **[old] mlyons** » November 3rd, 2005, 2:26 pm

As long as your logcard can be read properly and workouts copied to it from internal log memory than nothing has corrupted the card. In addition to upgrading RowPro have you also upgraded you PM3 to Rev 090? If not, the errors may continue to occur.<br /><br />Mark

[old] atheist · Post by **[old] atheist** » November 5th, 2005, 2:29 pm

<br /><br />the c2 website says i am current with version 82. who makes rev. 90?<br /><br />-steve<br />

[old] Ikabob · Post by **[old] Ikabob** » November 5th, 2005, 3:07 pm

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'><b>QUOTE(atheist @ Nov 5 2005, 01:29 PM)</b></div></td></tr><tr><td class='quote'>the c2 website says i am current with version 82. who makes rev. 90?<br /><br />-steve <br /> </td></tr></table><br /><br />Download the new updated firmware V90 . At the Concepr 2 websight....downloads.

[old] atheist · Post by **[old] atheist** » November 5th, 2005, 4:22 pm

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'><b>QUOTE(Ikabob @ Nov 5 2005, 03:07 PM)</b></div></td></tr><tr><td class='quote'><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'><b>QUOTE(atheist @ Nov 5 2005, 01:29 PM)</b></div></td></tr><tr><td class='quote'>the c2 website says i am current with version 82. who makes rev. 90?<br /><br />-steve <br /> </td></tr></table><br /><br />Download the new updated firmware V90 . At the Concepr 2 websight....downloads. <br /> </td></tr></table><br /><br />do you have a link to "Concepr 2"?<br /><br />another check of the site of the manufacturer (concept 2) showed the most current version of pm3 firmware is version 82. if you know of a more recent version on their site, i would need a direct link to it; it's not under "software downloads" on the pm3 page.

[old] Citroen · Post by **[old] Citroen** » November 6th, 2005, 7:36 am

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'><b>QUOTE(atheist @ Nov 5 2005, 08:22 PM)</b></div></td></tr><tr><td class='quote'><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'><b>QUOTE(Ikabob @ Nov 5 2005, 03:07 PM)</b></div></td></tr><tr><td class='quote'><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'><b>QUOTE(atheist @ Nov 5 2005, 01:29 PM)</b></div></td></tr><tr><td class='quote'>the c2 website says i am current with version 82. who makes rev. 90?<br /><br />-steve <br /> </td></tr></table><br /><br />Download the new updated firmware V90 . At the Concept 2 website....downloads. <br /> </td></tr></table><br /><br />do you have a link to "Concept 2"?<br /><br />another check of the site of the manufacturer (concept 2) showed the most current version of pm3 firmware is version 82. if you know of a more recent version on their site, i would need a direct link to it; it's not under "software downloads" on the pm3 page. <br /> </td></tr></table><br /><br />Try reading this <a href='http://concept2.ipbhost.com/index.php?showtopic=2917' target='_blank'>http://concept2.ipbhost.com/index.php?s ... 917</a><br /><br />You can download V90 from <a href='http://www.concept2.com/05/rower/servic ... update.asp' target='_blank'>http://www.concept2.com/05/rower/servic ... asp</a><br /><br />[PS. I've fixed the typographical errors in the earlier posts that I'm quoting.]

[old] atheist · Post by **[old] atheist** » November 6th, 2005, 12:02 pm

all set now. it seems the correct procedure is to use "beta update" to install the version 90. although it doesn't say "90" anywhere on the page referred to by the link, and there is no link to the proper page in the thread describing the new release. gee, i wonder why i was confused? <br /><br />-steve

[old] c2scott · Post by **[old] c2scott** » November 7th, 2005, 3:08 pm

Sorry about the link confusion; the changes to put Ver 90 in the "Firmware Update" area are in the queue to be updated. Soon...<br />