Model C front leg assembly bolts - allen wrench size?

[jerg]

Does anyone happen to know the size of the allen wrench for the bolts that hold the two front legs together and attach them to the frame?

[MPx]

Not sure what you mean by "Model 3" @Jerg? If its the latest Rowerg then the manual says it will be a T27 which I think is torx not allen. The Model C legs used allen bolts and the key was provided with the erg. You could try emailing info@concept2.com to get the size.

[jerg]

Not sure what you mean by "Model 3" @Jerg? If its the latest Rowerg then the manual says it will be a T27 which I think is torx not allen. The Model C legs used allen bolts and the key was provided with the erg. You could try emailing info@concept2.com to get the size.

Woops! Meant Model C. Thanks for the email.

[Carl Watts]

They have gone Torx now but the old Allen key is 5/32 and the bolts are like 1/4" UNC.

I have a Bondhus 5/32 and it fits perfectly.

There is nothing metric on the whole rower except the 17mm flywheel bearings.

[jerg]

They have gone Torx now but the old Allen key is 5/32 and the bolts are like 1/4" UNC.

I have a Bondhus 5/32 and it fits perfectly.

There is nothing metric on the whole rower except the 17mm flywheel bearings.

Thanks!