Negative meters + wrong training device

[ensc]

I did a short workout on the SkiErg and ErgData recorded it completely wrong:

• it was recorded for a RowErg
• only 24m were accounted for with a duration of 10:08.1 minutes. The split table (from ErgData) shows -988m in the last split

  Code: Select all

     Time		Meters	Pace		Watts	Cal/Hr	S/M
     10:08.1	24m	3:31:08.7		300	25
     5:00.0	1,012m	2:28.2		107	669	35
     5:08.0	-988m	57:23.2.9	-92	-19	15
     

  The split table on the device shows
  

  Code: Select all

     Time		Meters	Pace	Watts	Cal/Hr	S/M
     5:08.1	1,035m	2:28.8	106	665	34
     5:00.0	1,012m	2:28.2	107	669	35
     0:08.1	24m	2:48.7	73	550	15
     

Same happened yesterday with a similarly short distance.

The mixup of RowErg and SkiErg seems to be common too.

ErgData 2.1.3; Firmware 872, Hardware 620

[Citroen]

Send an email to info@concept2.com for your negative metres error.

[gvcormac]

Current firmware is 956. Suggest you update. Is it your ski erg?

https://www.concept2.com/service/monitors/pm5/firmware

[gvcormac]

Also, check battery in PM5. While the magneto will run it, it could possibly glitch if the battery is really low.

[ensc]

Current firmware is 956. Suggest you update.
https://www.concept2.com/service/monitors/pm5/firmware

Firmware version depends on the hardware revision; 872 is already the latest one for my SkiErg.