Buying a preowned concept 2 model D

Maintenance, accessories, operation. Anything to do with making your erg work.
Locked
Renegade
Paddler
Posts: 2
Joined: June 16th, 2021, 9:06 am

Buying a preowned concept 2 model D

Post by Renegade » June 16th, 2021, 9:15 am

Hi all!

New to rowing and am excited to get started.

I am considering buying a preowned model D concept 2 with PM5 monitor.

Can you help me understand what I should be looking for to check wear and tear and the condition?

Please see a pic of the total numbers on the PM5 of the one I am considering buying.

Image

I know this was bought new in Feb 2016 so just out of warranty.

User avatar
Ernits
500m Poster
Posts: 88
Joined: June 1st, 2019, 10:36 am

Re: Buying a preowned concept 2 model D

Post by Ernits » June 16th, 2021, 10:15 am

Well, 639k meters total is nothing. However, this number can be reset so it might not tell much.
If it has been in home use, it might be the real mileage, in which case it's pretty much as good as new :)

Renegade
Paddler
Posts: 2
Joined: June 16th, 2021, 9:06 am

Re: Buying a preowned concept 2 model D

Post by Renegade » June 16th, 2021, 1:37 pm

Ok right! Anything I should check when I see the machine?

User avatar
Ernits
500m Poster
Posts: 88
Joined: June 1st, 2019, 10:36 am

Re: Buying a preowned concept 2 model D

Post by Ernits » June 16th, 2021, 1:49 pm

Try to row, see if the chain is smooth, without any extra rattle or clunkiness. Any rust on the chain, fan cage, rail, anywhere for me would be a sign of neglect. Break the erg into two, see how the joint looks.

User avatar
ampire
6k Poster
Posts: 663
Joined: October 28th, 2017, 7:11 pm

Re: Buying a preowned concept 2 model D

Post by ampire » June 16th, 2021, 9:50 pm

That's a pretty low amount of meters so it hasn't had much use. Furthermore, the average 500 isn't high wattage and the distance per workout is low. So its probably had a pretty casual user.

Make sure the fan spins up and down without any rattle. Check the seat roller bearings and the rail. Separate the two pieces, flip the fan unit over, slide the translucent plastic cover off and inspect the bungee for damage and chain for rust. Open the PM5 battery cover and see if there is any corrosion.
M36|5'8"/173CM|146lb/66KG|LWT|MHR 192|RHR 42|2020: 5K 18:52.9 (@1:53.2/500)|C2-D+Slides+EndureRow Seat+NSI Minicell Foam

User avatar
Rick
1k Poster
Posts: 102
Joined: January 21st, 2021, 3:30 pm
Location: Gulf Coast of Texas, USA

Re: Buying a preowned concept 2 model D

Post by Rick » July 6th, 2021, 9:18 am

That’s a pretty low use machine! Looks like short workouts, and not a lot of time. I went and checked the one we bought for home use in January of 2021, and it has more total meters in 6 months than yours is showing! For reference, my wife and I are relatively new to rowing, and use ours three times a week each, me for 40 minutes and her for 20 each day. I just went over 500K this week on my own in that 6 month span, according to ErgData. This is far from heavy use for a rowing machine, as many here put on that much in less time! So, the machine you’re looking at has hardly broken a sweat so far.

That said, environment can be as wearing as use so it’s important to know where it was stored and used (dusty or wet environments are the hardest on rowers). The inspection items others have listed will reveal if it’s sucked in a lot of dust, animal hair, dirt, or been left to corrode in a wet area. When I was researching rowers as a fitness test tool for law enforcement officers, I was amazed at how different two machines of similar age could look, with maintenance and environment being the only real difference. With use on yours already pegged at “extremely little for 5 years old,” the concerns on how/where it was stored for most of its existence are what’s left to lock down.

I hope it works out for you.
63Y, M, 70” 215# Started: Jan 2021 @ 240# Goal: Fitness & Endurance
500 | 1000 | 2000 | 5000 | 30min | 10000 | HM
1:37 | 3:37 | 7:48 | 21:27 | 6803 | 45:24. | 1:42:08

Locked