Big J wrote: ↑November 19th, 2020, 2:58 am
In an effort to establish a baseline from which to train, I pushed my 2000m pb a bit to 6:47.9 (17 second reduction). Not a full-on, balls-out effort and shoulders were a little tired from push pressing before hand, but close enough. Completely fresh, I'd maybe have 6:40 in there.
I also had a most frustrating aborted run at 1000m two days ago. I'd been suffering a bit with an upset stomach, felt OK going onto the rower but in the space of 2 minutes went from not needing the loo to desperate and had to call off an attempt at about 750m. I was on for a 3:04/3:05 at that point. Shit happens, or as is thankfully not the case here. It feels like 3 minutes dead is where my max would be presently.
I'll have one last go at 500m to ideally get it under 1:25 and then I'll get started properly training.
When doing working sets, how far from PB pace should one be working in order for the work to be effective?
We are all different but if you can do a 3:04 1k, I reckon your 2k will be closer to 6:30 than 6:40 atm.
As for working sets, I'd probably advise that you go by feel, RPE (Rate of Perceived Exertion), or use a HR monitor. There are (at least) two schools of thought for training. Go hard or go home & 80% slow / long and 20% short / sharp.
I've found the 80/20 works best for me, using circa 70% as the general slow pace, and 80-85% occasionally too, but I have seen others make great progress with doing the vast majority of their training at circa 80%, and higher, of max HR. It's all about finding what works for you, and what you enjoy doing.
51 HWT; 6' 4"; 1k= 3:09; 2k= 6:36; 5k= 17:19; 6k= 20:47; 10k= 35:46 30mins= 8,488m 60mins= 16,618m HM= 1:16.47; FM= 2:40:41; 50k= 3:16:09; 100k= 7:52:44; 12hrs = 153km
"You reap what you row"
Instagram: stuwenman