PM5 Firmware Update without a computer

Discuss all things related to the BikeErg.
Post Reply
cdpatterson
Paddler
Posts: 6
Joined: September 19th, 2020, 2:56 am

PM5 Firmware Update without a computer

Post by cdpatterson » September 28th, 2020, 12:34 pm

I do not have a computer that allows me to install the utility application. Does anyone know if the firmware can be updated without the computer application.

User avatar
Citroen
SpamTeam
Posts: 8013
Joined: March 16th, 2006, 3:28 pm
Location: A small cave in deepest darkest Basingstoke, UK

Re: PM5 Firmware Update without a computer

Post by Citroen » September 28th, 2020, 12:52 pm

You can carry the firmware from a computer on a USB stick. Fits in the USB-A socket on the back of the PM5.

You'll need the C2 Utility on your computer to write the USB stick.

cdpatterson
Paddler
Posts: 6
Joined: September 19th, 2020, 2:56 am

Re: PM5 Firmware Update without a computer

Post by cdpatterson » September 28th, 2020, 12:58 pm

Thanks, but the problem is I do not have a computer that will allow me to install the utility. I need to do it without a computer.

User avatar
Citroen
SpamTeam
Posts: 8013
Joined: March 16th, 2006, 3:28 pm
Location: A small cave in deepest darkest Basingstoke, UK

Re: PM5 Firmware Update without a computer

Post by Citroen » September 28th, 2020, 2:05 pm

cdpatterson wrote:
September 28th, 2020, 12:58 pm
Thanks, but the problem is I do not have a computer that will allow me to install the utility. I need to do it without a computer.
You can't.

Take a USB stick round to a friend's house and load the firmware on their computer.

Dino
6k Poster
Posts: 878
Joined: December 23rd, 2018, 8:54 am

Re: PM5 Firmware Update without a computer

Post by Dino » September 28th, 2020, 3:52 pm

cdpatterson wrote:
September 28th, 2020, 12:58 pm
Thanks, but the problem is I do not have a computer that will allow me to install the utility. I need to do it without a computer.
Are you in the UK? If you are stuck I have a small spare USB stick I am not using and I can put the firmware on and put in the post to you (send me a PM) otherwise your only option will be as per Citroen's post.
56M HWT
50+PB 1m 326m, 500m 1:38,7, 1k 3:31.6, 2k 7:16.8, 5k 19:06.6, 6k 23:26.0, 30m 7730m, 10k 39:26.1, 60m 15025m, HM 1:25:04.7, FM 2:59:26.0, 50k 3:49:17.3, 34.2k OTW 3:52:57
A long way away from any of these PBs now!!

cdpatterson
Paddler
Posts: 6
Joined: September 19th, 2020, 2:56 am

Re: PM5 Firmware Update without a computer

Post by cdpatterson » October 1st, 2020, 7:10 am

Thanks for the offer. I managed to get the utility installed on my computer and have been able to update the firmware.

Dino
6k Poster
Posts: 878
Joined: December 23rd, 2018, 8:54 am

Re: PM5 Firmware Update without a computer

Post by Dino » October 1st, 2020, 9:00 am

cdpatterson wrote:
October 1st, 2020, 7:10 am
Thanks for the offer. I managed to get the utility installed on my computer and have been able to update the firmware.
Great - glad you sorted it. I know it can be an issue if you for example only have a work issued laptop which is locked down.
56M HWT
50+PB 1m 326m, 500m 1:38,7, 1k 3:31.6, 2k 7:16.8, 5k 19:06.6, 6k 23:26.0, 30m 7730m, 10k 39:26.1, 60m 15025m, HM 1:25:04.7, FM 2:59:26.0, 50k 3:49:17.3, 34.2k OTW 3:52:57
A long way away from any of these PBs now!!

PhaedrusZen
Paddler
Posts: 12
Joined: April 28th, 2016, 8:32 pm

Re: PM5 Firmware Update without a computer

Post by PhaedrusZen » February 11th, 2021, 10:57 pm

I'm curious why the utility program is needed. Why can't C2 just post the firmware update as a file on their website that you can download directly to a USB drive? I'm genuinely curious what the disconnect for this is, and am not just trying to complain. I am trying to update rowers that we have at work (fire stations), and all the work computers are locked down, so I can't install the utility software...a download of the actual firmware would be much simpler in cases like mine.

User avatar
Carl Watts
Marathon Poster
Posts: 4690
Joined: January 8th, 2010, 4:35 pm
Location: NEW ZEALAND

Re: PM5 Firmware Update without a computer

Post by Carl Watts » February 11th, 2021, 11:21 pm

Updating your PM5 is best done on a Window 10 laptop that has a fully charged battery and it plugged into the mains as well.

The PM5 is then plugged into the Laptop with a printer USB cable.

Personally I wouldn't update it any other way, you have parallel redundancy in place against possible things that can go wrong.

Anyone who cannot find a laptop and a cable in this day and age is living alone on a desert island in the middle of the Pacific.
Carl Watts.
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log

cdpatterson
Paddler
Posts: 6
Joined: September 19th, 2020, 2:56 am

Re: PM5 Firmware Update without a computer

Post by cdpatterson » February 12th, 2021, 4:38 am

Carl, I think you will find that there are quite a lot of people living on that desert island, especially as most organisations lock Windows 10 laptops so employees cannot install software. That was exactly the issue I had. My other home computer is a Chromebook which serves all basic computing needs. So I agree with the previous post that the firmware should just be available to download to USB drive.

User avatar
Citroen
SpamTeam
Posts: 8013
Joined: March 16th, 2006, 3:28 pm
Location: A small cave in deepest darkest Basingstoke, UK

Re: PM5 Firmware Update without a computer

Post by Citroen » February 12th, 2021, 7:22 am

cdpatterson wrote:
February 12th, 2021, 4:38 am
Carl, I think you will find that there are quite a lot of people living on that desert island, especially as most organisations lock Windows 10 laptops so employees cannot install software. That was exactly the issue I had. My other home computer is a Chromebook which serves all basic computing needs. So I agree with the previous post that the firmware should just be available to download to USB drive.
You should shout loudly at Concept2. They should be creating Chromebook and Linux X86_64/Linux AARCH64 versions of their utility by now.

My wife loves her Chromebook (she's had one since 2014 and replaced it last year with the equivalent Acer upgraded Chromebook). For Faceborg, Twitter, email and BBC's news it's an ideal machine.

User avatar
Carl Watts
Marathon Poster
Posts: 4690
Joined: January 8th, 2010, 4:35 pm
Location: NEW ZEALAND

Re: PM5 Firmware Update without a computer

Post by Carl Watts » February 12th, 2021, 10:23 pm

Sorry I'm obviously one of the few with two laptops and about five PC's sitting about that can do it, although having said that only one PC is a 64 Bit Windows 10 machine that can run the latest utility and the rest is a collection of old shit from as far back as about 1996 that I still use to take the older PM3's from older versions of firmware to v101. Was only about 6 months ago I began chucking out the Pentium 4 machines.
Carl Watts.
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log

Post Reply