Bikeerg- Replacing pedals
Bikeerg- Replacing pedals
Anyone changed the pedals on the bikeerg to some compatible with cycling shoes?
Any recommendations on both?
Don’t have a bike that I use outside so this would just be for the erg...
Thanks in advance.
Any recommendations on both?
Don’t have a bike that I use outside so this would just be for the erg...
Thanks in advance.
Re: Bikeerg- Replacing pedals
Ordering a pair of $10 strapless toe clips on Amazon would be good. I use clipless pedals and my cycling shoes but am ready to ditch them. Too much trouble having to get ready to ride. The strapless clips allow you to place your feet consistently on the pedals in the same position. besides, the old theory of pull up on the pedals has been debunked, and for something like a stationary bike really not of much use. My opinion only.
-
- Paddler
- Posts: 16
- Joined: September 27th, 2017, 6:48 pm
Re: Bikeerg- Replacing pedals
I believe these are what chipman is referring to, https://www.amazon.com/gp/product/B002N ... UTF8&psc=1. I'v got them on my Bikeerg and love them.chipman wrote: ↑March 27th, 2019, 11:27 amOrdering a pair of $10 strapless toe clips on Amazon would be good. I use clipless pedals and my cycling shoes but am ready to ditch them. Too much trouble having to get ready to ride. The strapless clips allow you to place your feet consistently on the pedals in the same position. besides, the old theory of pull up on the pedals has been debunked, and for something like a stationary bike really not of much use. My opinion only.
Re: Bikeerg- Replacing pedals
Ordered the same things and fitted them to my erg when I set it up this week, work really well and don't need to worry about different foot ware at this stage.VivaTerlingua wrote: ↑April 12th, 2019, 4:35 pmI believe these are what chipman is referring to, https://www.amazon.com/gp/product/B002N ... UTF8&psc=1. I'v got them on my Bikeerg and love them.chipman wrote: ↑March 27th, 2019, 11:27 amOrdering a pair of $10 strapless toe clips on Amazon would be good. I use clipless pedals and my cycling shoes but am ready to ditch them. Too much trouble having to get ready to ride. The strapless clips allow you to place your feet consistently on the pedals in the same position. besides, the old theory of pull up on the pedals has been debunked, and for something like a stationary bike really not of much use. My opinion only.
Re: Bikeerg- Replacing pedals
I would recommend clipless SPD type pedals over clips or toe straps since you will be able to get 360 degree engagement in your pedaling rather than just on the down stroke.
While not the same bike, I replaced the pedals on my spin bike with the Shimano A520. If you have cycling shoes with cleats, these are great for indoor use since they are only one sided and have a platform that the sole of the shoe can rest against, rather than just the cleat. Much more comfortable than typical SPD pedals. That bike did come with toe straps and I can say that the clipless pedals give me a significantly better workout, in part due to the cycling shoes plus pedals have no give or cushion to absorb effort.
https://www.amazon.com/SHIMANO-PD-A520- ... 2-fkmrnull
While not the same bike, I replaced the pedals on my spin bike with the Shimano A520. If you have cycling shoes with cleats, these are great for indoor use since they are only one sided and have a platform that the sole of the shoe can rest against, rather than just the cleat. Much more comfortable than typical SPD pedals. That bike did come with toe straps and I can say that the clipless pedals give me a significantly better workout, in part due to the cycling shoes plus pedals have no give or cushion to absorb effort.
https://www.amazon.com/SHIMANO-PD-A520- ... 2-fkmrnull
- johnlvs2run
- Half Marathon Poster
- Posts: 4012
- Joined: March 16th, 2006, 1:13 pm
- Location: California Central Coast
- Contact:
Re: Bikeerg- Replacing pedals
I use home made diy wood pieces on old touring bike pedals with bathtub grip tape wrapped around on my bicycle wind trainer setup to ride barefoot, and could feasibly do the same thing on the Bikeerg. I had intermittently changed to an old pair of clipon cycling cleats and pedals for some time trials, then changed back to barefoot riding and found it to be just as fast. The only difference is that occasionally my feet would come off the pedals, but it wasn't a common event and not a big deal.
bikeerg 75 5'8" 155# - 18.5 - 51.9 - 568 - 1:52.7 - 8:03.8 - 20:13.1 - 14620 - 40:58.7 - 28855 - 1:23:48.0
rowerg 56-58 5'8.5" 143# - 1:39.6 - 3:35.6 - 7:24.0 - 18:57.4 - 22:49.9 - 7793 - 38:44.7 - 1:22:48.9 - 2:58:46.2
rowerg 56-58 5'8.5" 143# - 1:39.6 - 3:35.6 - 7:24.0 - 18:57.4 - 22:49.9 - 7793 - 38:44.7 - 1:22:48.9 - 2:58:46.2
Re: Bikeerg- Replacing pedals
Intend doing this and have ordered Shimano double-sided pedals so I can clip in while my wife prefers the flat pedals.
First observations is that the saddle is comfy.
Only got my BikeErg yesterday
First observations is that the saddle is comfy.
Only got my BikeErg yesterday
66 going on 67. One time full on erger. Now Erging and BikeErging.
LWT is the norm.
6:38.7 was a longtime ago
LWT is the norm.
6:38.7 was a longtime ago
Re: Bikeerg- Replacing pedals
Put double sided Shimano pedals on the BikeErg and find the difference is noticeable.
No shoes slipping because of being clipped in.
Other side of pedals flat for use by MrsRR.
Also fitted a bottle cage onto handlebar stem using snap ties
So far so good.
No shoes slipping because of being clipped in.
Other side of pedals flat for use by MrsRR.
Also fitted a bottle cage onto handlebar stem using snap ties
So far so good.
66 going on 67. One time full on erger. Now Erging and BikeErging.
LWT is the norm.
6:38.7 was a longtime ago
LWT is the norm.
6:38.7 was a longtime ago
Re: Bikeerg- Replacing pedals
With proper pedaling form, you should be able to use flat pedals without any lose of power or sliding around.
- johnlvs2run
- Half Marathon Poster
- Posts: 4012
- Joined: March 16th, 2006, 1:13 pm
- Location: California Central Coast
- Contact:
Re: Bikeerg- Replacing pedals
I got a BE in August, have replaced the seat and handlebar, but the pedals are fine.
I'm using a pair of old road racing shoes with thin hard soles and, including sprints, they don't slip at all.
The pedals have little nubs that help to keep the shoes in position. Plus, clips don't guarantee not losing the pedals.
I'm using a pair of old road racing shoes with thin hard soles and, including sprints, they don't slip at all.
The pedals have little nubs that help to keep the shoes in position. Plus, clips don't guarantee not losing the pedals.
bikeerg 75 5'8" 155# - 18.5 - 51.9 - 568 - 1:52.7 - 8:03.8 - 20:13.1 - 14620 - 40:58.7 - 28855 - 1:23:48.0
rowerg 56-58 5'8.5" 143# - 1:39.6 - 3:35.6 - 7:24.0 - 18:57.4 - 22:49.9 - 7793 - 38:44.7 - 1:22:48.9 - 2:58:46.2
rowerg 56-58 5'8.5" 143# - 1:39.6 - 3:35.6 - 7:24.0 - 18:57.4 - 22:49.9 - 7793 - 38:44.7 - 1:22:48.9 - 2:58:46.2
Re: Bikeerg- Replacing pedals
Hearing what you say, but just gives a bit more security.
Armstrong in a different league and I certainly won’t be doing anything that fast.
Armstrong in a different league and I certainly won’t be doing anything that fast.
66 going on 67. One time full on erger. Now Erging and BikeErging.
LWT is the norm.
6:38.7 was a longtime ago
LWT is the norm.
6:38.7 was a longtime ago
Re: Bikeerg- Replacing pedals
66 going on 67. One time full on erger. Now Erging and BikeErging.
LWT is the norm.
6:38.7 was a longtime ago
LWT is the norm.
6:38.7 was a longtime ago
Re: Bikeerg- Replacing pedals
Some of the old names keep crawling alonghere.
Bonjour Dougie
Bonjour Dougie
66 going on 67. One time full on erger. Now Erging and BikeErging.
LWT is the norm.
6:38.7 was a longtime ago
LWT is the norm.
6:38.7 was a longtime ago