Introduction To Indoor Rowing

[old] H_2O · Post by **[old] H_2O** » February 2nd, 2006, 3:04 pm

I have written up some information in the hope that it will get new rowers to a smooth start. I hope that more experienced and accomplished rowers on this board will correct my errors and contribute their own thoughts. Note that this info is not endorsed by Concept2 in any way. This document is updated continually according to the suggestions of board members. Welcome to the concept2 rowing ergometer (the rowing machine, the erg). Here are some quick pointers to training and the technique of erging: 0. Message boards Now that you have found this message board be advised that the UK has a similar <a href="http://www.concept2.co.uk/forum/" target="_blank">message board</a> with much invaluable information 1. The machine You are most likely using a concept2 model C (monitor labelled PM2 or PM2+, straight wooden handle) or the newer model D (monitor labelled PM3, curved polymer handle). Identify which it is since the PM2 and PM3 monitors are quite different. 2. Monitor display Both monitors can display a variety of statistics such as: time for 500m (the pace or split) power output in Watts power output in calories per hour The pace is the statistic most discussed on this board. For pace and Watts you can simultaneously display both the current value as well as the average value for the row up to the present. To learn the complete use of the monitors go here: <a href="http://www.concept2.com/05/rower/service/PM2_intro.asp" target="_blank">PM2/PM2+</a>, <a href="http://www.concept2.com/05/rower/servic ... ervice.asp" target="_blank">PM3</a> 3. Resistance level -- Drag factor The resistance you experience comes from the acceleration of air by means of the fan in the circular housing at the front end of the erg. The leaver on the side of the fan opens or closes the fan (resistance level setting). The more air you let in the more air you have to accelerate and the more resistance you will experience. How much air gets accelerated depends on how far the fan intake is opened (resistance level setting) but also on the condition of the machine (dust in the fan intake and on the fan blades). Consequently the same level setting on different machines can lead to different actual resistance levels. To account for these differences we have the so called drag factor, a normalized measure of the actual resistance. Equal drag factor on different machines means equal resistance. The erg can measure and display the drag factor. To display the drag factor at any given resistance level setting proceed as follows: PM2/PM2+ monitor: Clear the monitor (press Off/On twice). Now hold down both the "rest" and "OK" button. The word "drag" appears in the lower right corner of the monitor. Row for a while at 2:15 splits. The drag factor will be displayed in field labelled "drag". PM3 monitor: Press "other options", then "display drag factor" and proceed as above. Now move the resistance lever up and down (while rowing) and observe how the drag factor changes. Which drag factor should you be using: 100 - 130 is a good setting for most but opinions on this differ. There is much discussion of the drag factor on this message board. My own preference is for the lower end of the range. Note that these settings correspond to low resistance settings on the erg. It is a common mistake for beginners to be on level 10. 4. Technique The stroke begins with the handle all the way forward (the catch) and ends when the handle returns to this position. It has two major phases: The drive: pulling the handle back, this is where all the power is generated. The drive begins at the catch and ends at the finish. The legs engage first with arms fully stretched. Most of the power is generated by the legs. In this phase think push the machine away with your legs, knees down and hang from the handle. When the knees are down nearly all the way the back engages (arms still fully stretched and we are still hanging from the handle). The arms engage last and pull the handle into the sternum (the finish). If you pull the handle to the navel or below you are pulling too low. Hold the handle gently with your finger tips at both ends (as far apart as possible) don't clasp it. The recovery: moving foward to the catch again. After the finish get the hands forward quickly ("quick hands"). Do not pause at the finish. The transition from moving backward to moving forward must be smooth. The correct sequence is: hands forward, torso swings forward into upright position, knees upward in this order. The hands clear the knees before these move up. The handle moves in a straight line at all times with the chain as stable as possible. If you have to lift the handle over the knees (up and down motion) your hands are too late. Move forward until your shins are vertical (but not further). A more precise description and complete discussion of common mistakes can be found in the training guide below. Here you can see the <a href="http://www.invernessrowingclub.co.uk/pe ... o_erg.html" target="_blank">stroke</a> of Xeno Mueller (olympic gold and silver medalist, single scull): 5. Breathing rhythm The breathing has to be coordinated with the other movements. There are two possibilities: Low stress (slow speed): breathe once per stroke: inhale on the drive and exhale on the recovery. Higher stress (faster speed): breathe twice per stroke: exhale at the catch and finish and inhale on the drive and recovery. 6. Stroke rate, stroke power The stroke rate is the number of strokes per minute (spm), displayed in the upper right corner of the monitor. It is an important statistic. As a new rower it is important to develop the skill of generating power at low stroke rates. Your first task will be to build an aerobic base and the associated rowing is steady state at low stroke rates (18 - 22). The stroke power index (SPI) is the quotient SPI = Watts/spm This is a measure of the power put into each stroke. To build an aerobic base you must row slowly. When we row more slowly but do not decrease the stroke rate the SPI decreases (Watts go down but spm remains constant). This means that the power put into each stroke has decreased. If this decrease is too great this rowing bears no similarity to rowing under race conditions. In other words we want to keep the stroke power in a somewhat narrow band (such as SPI 10-12, depends on sex, size). The way to do this is to slow down mainly by decreasing the stroke rate and to speed up mainly by increasing the stroke rate. We do not slow down mainly by decreasing the stroke power or speed up mainly by increasing the stroke power. Consequently it is important to develop the skill to control both your stroke rate and the associated power output (Watts or splits). All training plans below prescribe some rowing pieces at restricted stroke rates and rowers report their pieces with the stroke rates used such as 30r20: 1:55 meaning a row of 30 minutes at stroke rate 20 averaging 1:55 per 500m. Note that 20 is not the most efficient stroke rate for a maximal effort over 30 minutes. You can row faster by rating 26-29 but nonetheless 30r20 is a classic training piece for strength (endurance) development. 7. Training Guide Please <a href="http://www.concept2.co.uk/guide/guide.php" target="_blank">browse</a> the UK training guide and <a href="http://www.concept2.co.uk/guide/downloads.php" target="_blank">download</a> it. This has descriptions and illustrations of the correct technique, training programs for various goals, material on exercise physiology, stretching etc. Training plans aimed specifically at 2K race preparation are the <a href="http://concept2.ipbhost.com/index.php?showtopic=2692" target="_blank">Wolverine Plan</a>, <a href="http://concept2.ipbhost.com/index.php?showtopic=3453" target="_blank">Xeno Mueller's Plan</a> and, if you like high intensity lower volume, <a href="http://www.concept2.co.uk/forum/viewtopic.php?t=5409" target="_blank">Pete Plan</a> 8. What do do first? Develop an aerobic base by rowing steadily and slowly (see UT2 in the UK training guide). Practice control of pace (should not jump around from stroke to stroke, at most one second variation) and rating slowly (stroke rates 18-22). 9. Training log, racing, online rankings. Once you have registered as a member of this site you can record all your rows in your training log (distance rowed and time taken). The official race distance is 2000 meters and there are many races all over the world. In addition Concept2 maintains a database of world wide times for other distances annually. You row a piece and submit your time to your training log and then "rank" it. You can only rank the following standard pieces: 500m 1000m (1K) 2000m (2K) 5K 6K 10K 100K (team) Half marathon Full marathon 4 minutes (how far) 30 minutes (how far) 60 minutes (how far) Times are not ordinarly verified and then are designated "IND" in the rankings. There are ways of verifying your times and obtaining the designation "IND_V". The details of this are discussed elsewhere. Have fun!

[old] Godfried · Post by **[old] Godfried** » February 2nd, 2006, 3:21 pm

Nice list. Ad 2. time for 500m ("the split") Should be called "pace" as it is possible to set max 20 or max 30 splits depending on PM2 / PM3. Ad 3. Drag factor on PM2/PM2+ Do not use a HRM as it will hide the drag factor.

[old] Ray79 · Post by **[old] Ray79** » February 3rd, 2006, 7:29 am

Nice list and covers the main points. I do have issue with this <table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'>QUOTE</div></td></tr><tr><td class='quote'>B. The "recovery" Moving foward to the catch again. After the finish get the hands forward quickly ("quick hands"). The correct sequence is: hands forward, knees upward, back forward in this order. </td></tr></table> I dont think that this is the correct sequence. The recovery should be the opposite of the drive surely. For example The Drive = Legs (slide), Body, Arms The Recovery = Arms, Body, Slide (legs). If you dont have the body set in a good position before the slide you will end up with poor posture, and rushing the slide. Plus you should add in something about rotating from the hip and warn against bending or hunching the back.

[old] gooseflight · Post by **[old] gooseflight** » February 3rd, 2006, 7:49 am

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'>QUOTE(Ray79 @ Feb 3 2006, 12:29 PM)</div></td></tr><tr><td class='quote'>Nice list and covers the main points. I do have issue with this <table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'>QUOTE</div></td></tr><tr><td class='quote'>B. The "recovery" Moving foward to the catch again. After the finish get the hands forward quickly ("quick hands"). The correct sequence is: hands forward, knees upward, back forward in this order. </td></tr></table> I dont think that this is the correct sequence. The recovery should be the opposite of the drive surely. For example The Drive = Legs (slide), Body, Arms The Recovery = Arms, Body, Slide (legs). If you dont have the body set in a good position before the slide you will end up with poor posture, and rushing the slide. Plus you should add in something about rotating from the hip and warn against bending or hunching the back. </td></tr></table> I agree with Ray. Other points for consideration: Don't emphasise "pulling the handle back" as the start of the drive. This implies that the arms lead the drive. It's better to visualize pushing the machine away with the legs. There should be no pause at the end of the drive/start of recovery. Many beginners thing that the way to row low rate is to pause with the hands at the body before starting the recovery. Then, as Ray says, it's hands away, pivot over the hips and only break the legs when the hands are past the knees: hands THEN body THEN legs.

[old] H_2O · Post by **[old] H_2O** » February 3rd, 2006, 8:04 am

OK, Thanks, I'll correct it as soon as possible (tonight).

[old] Daren C · Post by **[old] Daren C** » February 3rd, 2006, 8:05 am

If you work on the formatting (use more paragraphs, fewer new lines, some bold or underlining for headings etc.) it will make it more readable, and easier to digest. At the moment, the information may be great, but it looks a mess.

[old] CarpeDiem90 · Post by **[old] CarpeDiem90** » February 3rd, 2006, 8:37 am

Thanks for the information! It is really helpful to a beginner like me. I have been rowing for 3 months and I have 2 questions for you. 1. I row at the YMCA and I think that the PM3 may be off in regards to the SPM. It is very easy for me to row between 30-34 SPM, but most of the workouts and forum information talks about SPM in the 20s. I usually row at a 4 resistance level. Is the PM3 out of sync? What am I doing wrong? 2. At the end of my rows (30-35 minutes long), my feet become numb and feel strange. What causes this sensation? Could my foot straps be too tight? Thanks! Carpe Diem!

[old] Ray79 · Post by **[old] Ray79** » February 3rd, 2006, 8:53 am

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'>QUOTE(CarpeDiem90 @ Feb 3 2006, 07:37 AM)</div></td></tr><tr><td class='quote'>Thanks for the information! It is really helpful to a beginner like me. I have been rowing for 3 months and I have 2 questions for you. 1. I row at the YMCA and I think that the PM3 may be off in regards to the SPM. It is very easy for me to row between 30-34 SPM, but most of the workouts and forum information talks about SPM in the 20s. I usually row at a 4 resistance level. Is the PM3 out of sync? What am I doing wrong? 2. At the end of my rows (30-35 minutes long), my feet become numb and feel strange. What causes this sensation? Could my foot straps be too tight? Thanks! Carpe Diem! </td></tr></table> The resistance level you quote (on a clean well maintained machine) should be fine, it should give a drag factor of 115 - 125, idea for training. I dont think that the PM3 is out of sync. Alot of people when they start rowing row at 30-34, shooting up and down the slide. These rates are fine for racing but more importantly the ratio needs to be right. The general concensus seems to favour a 1:2 ratio of drive:recovery. The drive should be sharp at the catch, building pressure to a strong finish. The hands should go away nice and quick, body pivots then use your hamstrings to control a nice slow and relaxed slide back to the catch. As you pivot your body, transfer your weight onto your feet and dont allow the weight to rush you up the slide. Most people include alot of long, low rate rows to help build an aerobic base, build a powerful stroke and to perfect their technique. Then sharp short intervals to prepare for racing, holding the technique soild, and altering the ratio so as they can go as fast as possible. The sensation you are feeling after rowing for 30-35 mins may be caused by the foot straps, but more likely it is ude to the way you are sitting on the seat. If you are too far back, the backs of your thighs will be on the seet with the legs straight, and this can restrict the flow of blood. Sit a little further forward and on your "sits" bones, so that only your backside is touching the seat at any time during the stroke. Hope this helps

[old] CarpeDiem90 · Post by **[old] CarpeDiem90** » February 14th, 2006, 10:47 pm

The sensation you are feeling after rowing for 30-35 mins may be caused by the foot straps, but more likely it is ude to the way you are sitting on the seat. If you are too far back, the backs of your thighs will be on the seet with the legs straight, and this can restrict the flow of blood. Sit a little further forward and on your "sits" bones, so that only your backside is touching the seat at any time during the stroke. Your suggestion on sitting further forward on the seat worked! Thanks!

[old] Godfried · Post by **[old] Godfried** » March 2nd, 2006, 4:56 am

I really like the list now. Maybe mention the Pete Plan ? see <a href="http://www.concept2.co.uk/forum/viewtopic.php?t=5409" target="_blank">The Pete Plan</a>?

[old] Ray79 · Post by **[old] Ray79** » March 2nd, 2006, 7:30 am

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'>QUOTE(Godfried @ Mar 2 2006, 03:56 AM) </div></td></tr><tr><td class='quote'>I really like the list now. Maybe mention the Pete Plan ? see <a href="http://www.concept2.co.uk/forum/viewtopic.php?t=5409" target="_blank">The Pete Plan</a>? </td></tr></table> Yea its a good list. Think the pete plan is worth a mention as well, but with a disclaimer that it is bloody hard work and to sort out technique etc before attempting to follow it. Any chance of getting this list pinned to the top of the list so it doesnt go un noticed??

[old] H_2O · Post by **[old] H_2O** » March 2nd, 2006, 8:38 am

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'>QUOTE(Godfried @ Mar 2 2006, 03:56 AM) </div></td></tr><tr><td class='quote'>I really like the list now. Maybe mention the Pete Plan ? see <a href="http://www.concept2.co.uk/forum/viewtopic.php?t=5409" target="_blank">The Pete Plan</a>? </td></tr></table> OK. I put in the Pete Plan. Thanks.

[old] Citroen · Post by **[old] Citroen** » March 2nd, 2006, 3:45 pm

<table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td><div class='genmed'>QUOTE</div></td></tr><tr><td class='quote'>9. Training log, racing, online rankings. </td></tr></table> How about mentioning the Nonathlon (http://www.nonathlon.com) in section 9.? How about mentioning the Forum Cross Team Challenge (http://c2ctc.com) there too?

Concept2 Forum

Introduction To Indoor Rowing

General

General

General

General

General

General

General

General

General

General

General

General

General