Has anyone gotten the new Iphone 5c to work with a PM3? I have the adaptor, the connection kit from C2. Firmware is 108, Hardware version is 450 and the serial number starts at 3001. All I get is please connect to the PM3 when I launch the erg app. I have tried several lightning to 30 pin adaptors, but the phone never sees the PM3. Not sure what to look at next....
Larry
Iphone 5c connection to a PM3
-
Larry Price
- Paddler
- Posts: 6
- Joined: October 23rd, 2009, 6:37 pm
- Location: Edgewood, WA USA
Iphone 5c connection to a PM3
Larry Price
Edgewood, WA USA
Edgewood, WA USA
-
Citroen
- SpamTeam
- Posts: 8011
- Joined: March 16th, 2006, 3:28 pm
- Location: A small cave in deepest darkest Basingstoke, UK
Re: Iphone 5c connection to a PM3
http://www.concept2.com/service/software/ergdata/faqs
That says use an expensive (aka over priced) Apple lightening to 30pin adapter.
That says use an expensive (aka over priced) Apple lightening to 30pin adapter.
-
Larry Price
- Paddler
- Posts: 6
- Joined: October 23rd, 2009, 6:37 pm
- Location: Edgewood, WA USA
Re: Iphone 5c connection to a PM3
I will give it a try, I can always return all this stuff if it doesn't work... Thanks
Larry
Larry
Larry Price
Edgewood, WA USA
Edgewood, WA USA
-
Larry Price
- Paddler
- Posts: 6
- Joined: October 23rd, 2009, 6:37 pm
- Location: Edgewood, WA USA
Re: Iphone 5c connection to a PM3
Success! the official Apple 30pin adaptor works. Now if the app would behave itself then I could be happy with it. Any time I get a text or ping, the app halts, freezes. All rowing data is then lost. 
I was doing a 10k, perhaps that is the issue. Last night I did 2 5k's with a 5 min break in between. No problems. Have to check it out some more.
I was doing a 10k, perhaps that is the issue. Last night I did 2 5k's with a 5 min break in between. No problems. Have to check it out some more.Larry Price
Edgewood, WA USA
Edgewood, WA USA