Checking space req. before buying...

johnmevansiii · Post by **johnmevansiii** » October 29th, 2006, 12:47 pm

Hi all,

I'm sold on the c2 in theory. However, I do not have the full 9 ft. in the spot where I'd like to use this. I am a few inches short on space... more like 105" rather than 108". However, I'm only about 5-9"...

Can anyone tell me how serious the 9ft requirement is? And does that bake in a little extra for people who are tall, i.e., >6ft?

Thanks!

joelj · Post by **joelj** » October 30th, 2006, 6:48 pm

I'm sure you'll be fine. The machine is 8' long, and I don't see why you wouldn't be able to put the front within an inch or so of the wall. That would leave you 8" in the back, and you'd have to be a lot taller than 5' 9" for that not to be enough space.

- Joel

johnmevansiii · Post by **johnmevansiii** » October 30th, 2006, 8:01 pm

great. thanks for the quick response!

Tom Barrick · Post by **Tom Barrick** » November 1st, 2006, 5:49 am

johnmevansiii wrote:Hi all,

I'm sold on the c2 in theory. However, I do not have the full 9 ft. in the spot where I'd like to use this. I am a few inches short on space... more like 105" rather than 108". However, I'm only about 5-9"...

Can anyone tell me how serious the 9ft requirement is? And does that bake in a little extra for people who are tall, i.e., >6ft?

Thanks!

What you have is definitely do-able, and you'll learn not to lay back too far right off...not that you have the option to do so. Good luck!

Concept2 Forum

Checking space req. before buying...

Checking space req. before buying...

Re: Checking space req. before buying...