Page 1 of 1
New Monitor pickup does not record data
Posted: June 4th, 2018, 11:28 am
by mickyduck
HI Just replaced the pickup on my partners model C and it does not record any data. When she starts to row the PM5 illuminates but that is all. I have swapped over the PM5 from my D (to see if it was he PM5 that was faulty) and that is the same.. her PM5 also works with my D. Not a difficult task to fit or too teckie so cannot see what I can have done wrong.
Any ideas?
I have already contacted
info@concept2.co.uk and awaiting a response
Thanks
Re: New Monitor pickup does not record data
Posted: June 4th, 2018, 11:35 am
by Citroen
Re: New Monitor pickup does not record data
Posted: June 4th, 2018, 2:23 pm
by mickyduck
Thank
4 a looks like the answer.. neither PM5 work with the new sensor both PM5 work with my sensor..... so must be the new sensor
Re: New Monitor pickup does not record data
Posted: June 4th, 2018, 2:48 pm
by Citroen
The model B/C sensor is different to the model D/E. You need to re-configure the PM5 for the B/C sensor.
Re: New Monitor pickup does not record data
Posted: June 4th, 2018, 4:11 pm
by mickyduck
thanks that fixed it but strange that her PM5 chenged D/E when it has been working on her C for a couple of years.....
Just read changing the batteries can cause this
Re: New Monitor pickup does not record data
Posted: June 4th, 2018, 4:31 pm
by Citroen
mickyduck wrote:Just read changing the batteries can cause this
If you let the batteries go 100% flat for more than 24 hours the PM5 will go brain dead and revert to the hardware defined sensor type. Change them at > 1% left and you'll have no problems.
Re: New Monitor pickup does not record data
Posted: June 4th, 2018, 4:52 pm
by mickyduck
they were not flat Susan rows daily but on inserting the new ones we got an error code... maybe that caused it