Broken piece that I cannot identify

[joe80]

After 41 million metres + during the past seven years, I've inspected the bushing for the first time. It's a little worn and can't be easily turned but still looks strong so I'll let sleeping dogs lie.

Have to say that it hasn't been subjected to the power that some of you guys can lay down.

Regards,

Joe

[Yankeerunner]

Have to say that it hasn't been subjected to the power that some of you guys can lay down.

Regards,

Joe

I'm somewhat powerless myself Joe. Easy on the erg though.

[sekitori]

I too was lucky. After reading this thread I checked my erg and saw that after 12 years and 25M meters, the brushing was deformed. I was doubly lucky because I was able to turn the piece and continue on....perhaps for another 25M ??

I just noticed this topic which covered something I never realized even existed. After 10 years and I have no idea how many meters, my bushing had worn down by at least a couple of millimeters. There was still enough of the brass (or whatever metal it's made of) remaining where there seemed to be no immediate danger of cracking. Even so, compared to the unused sides, the wear was considerable. Turning it was surprisingly easy. I first removed the handle and then used locking pliers to hold the swivel body in place (with a soft cloth between its jaws to prevent it from scratching). I then turned the bushing with a regular pair of pliers and it rotated quite easily.

I have no idea how long the bushing will last in its new position, but it should be quite a long time. I will check with nysaag in about ten years to see how things are holding up.