Using SkiErg with a PowerPlate machine?
-
- Paddler
- Posts: 26
- Joined: November 30th, 2010, 2:04 pm
Using SkiErg with a PowerPlate machine?
Has anyone experimented with standing on a vibration plate machine -- like the PowerPlate MOVE -- while working out on the SkiErg?
Re: Using SkiErg with a PowerPlate machine?
Your mention is this first I've heard of a Power Plate. I'm skeptical.
Their propaganda says "not loud" but if it shakes you at 50Hz how could it not be?
Five minutes of Google has turned up only infomercial material. I'll look a bit further.
Their propaganda says "not loud" but if it shakes you at 50Hz how could it not be?
Five minutes of Google has turned up only infomercial material. I'll look a bit further.
Re: Using SkiErg with a PowerPlate machine?
My gym has two of these plates and you can hear them through the complete building, when they are used
Experience in using them, in what scenario ever, I cannot provide.
Experience in using them, in what scenario ever, I cannot provide.
Male - '80 - 82kg - 177cm - Start rowErg Jan 2022
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:26.2
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:26.2
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
-
- Paddler
- Posts: 26
- Joined: November 30th, 2010, 2:04 pm
Re: Using SkiErg with a PowerPlate machine?
I said "like a [machine from a particular manufacturer]". There are literally dozens of different manufacturers:: Power Plate, LifePro, Bulefin Fitnes, Confidence Fitness, Sunny Health and Fitness, Vibra Tec, Hurtle, Zeny, Merach, Vibrogym, etc. One line interesting to me is Vibra Pro Fitness, because some of their machines generate torsional vibrations -- but that's just me. Power Plate is but one of many manufacturers.
How can any health club or consumer machine with an oscillating motor in that frequency range be quiet? There are plenty of YT videos showing people on a wide variety of Vibration Plate Exercise Machines -- like https://www.youtube.com/watch?v=VCycu4vgFG0&t=705s . That machine is clearly intended for home use; oppressive noise would not work for condo/apartment users.Their propaganda says "not loud" but if it shakes you at 50Hz how could it not be? Five minutes of Google has turned up only infomercial material. I'll look a bit further.
Here's how ChatGPT answered your question:
One video noted low-frequency noise with a home machine. The machine was fine; the problem was the power cord vibrating on a hardwood floor. The fix was easy peasy. If noise at home were a categorical problem for Vibrating Plate exercise machines, the YouTubers would be all over it. Ditto for problems with a vibe machine at a health club. @Sakly's machines at his club sound badly broken: a distraction and possibly a hazard to users. Please report 'em to club management immediately.Q: How can a vibration plate exercise machine oscillating at 50hz be quiet?
A: Making a vibration plate exercise machine operating at 50 Hz quiet requires careful attention to its design and engineering. Here are the primary strategies:
1. Damping and Isolation
• Rubber Feet or Shock Absorbers: Placing high-quality rubber feet or shock absorbers under the machine reduces vibration transmission to the floor, which can amplify noise.
• Internal Damping Materials: Using sound-absorbing materials (e.g., foam, rubber, or silicone) inside the machine’s housing helps dampen vibrations within the structure.
2. Precision Engineering
• Balanced Components: Ensuring that all moving parts are precisely balanced minimizes unnecessary vibrations that can cause noise.
• High-Quality Bearings: Using high-quality, low-friction bearings reduces mechanical noise from the oscillating components.
3. Structural Design
• Rigid Frame: A sturdy frame resists flexing and reduces noise caused by vibration of the structure itself.
• Compact Motors: Using smaller, well-encased motors with efficient designs can significantly reduce motor noise.
4. Acoustic Insulation
• Enclosed Housing: Encasing the motor and mechanical components in soundproofed housing reduces the noise that escapes.
• Sound Barriers: Adding barriers or covers made from sound-dampening materials further minimizes emitted noise.
5. Advanced Motor Technology
• Brushless Motors: Using brushless DC motors or other quiet motor technologies can reduce the hum and buzz typical of older or less efficient motor designs.
• Variable Frequency Drives (VFD): These ensure smoother operation by avoiding abrupt changes in speed or torque that generate noise.
6. Frequency Tuning
• Avoid Resonant Frequencies: Designing the machine to operate at a frequency that does not align with the natural resonant frequency of its components or surroundings reduces noise amplification.
7. User Placement Considerations
• Surface Compatibility: Placing the machine on a carpeted floor or a dedicated anti-vibration mat prevents noise amplification through hard flooring.
• Proper Assembly: Ensuring all parts are tightly secured prevents rattling or clicking noises.
8. Maintenance
• Lubrication: Keeping bearings and other moving parts well-lubricated reduces friction noise.
• Tightened Components: Periodic checks for loose screws or bolts can prevent noise from mechanical looseness.
Implementing a combination of these strategies results in a quieter vibration plate machine without sacrificing performance.
I'd really like to hear first-hand reports using a SkiErg with a vibrating plate exercise machine.
Re: Using SkiErg with a PowerPlate machine?
Don't know if these machines are "badly broken", as I don't use them, but it sounds absolutely logical to me, that any oscillating machine with high mass on a hard surface with no damping (concrete) will induce structure-borne sound into the wall. That's no special case of a broken machine.
With regard to your question: I would assume the height of these plates could be a problem, when placed in front of a SkiErg, if the height is not compensated. This would distract the stroke, as you probably can't fully reach up to get a good stroke.
But again, no experience in this combo (and I assume there will be very few from others, if any at all).
With regard to your question: I would assume the height of these plates could be a problem, when placed in front of a SkiErg, if the height is not compensated. This would distract the stroke, as you probably can't fully reach up to get a good stroke.
But again, no experience in this combo (and I assume there will be very few from others, if any at all).
Male - '80 - 82kg - 177cm - Start rowErg Jan 2022
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:26.2
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:26.2
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
-
- Marathon Poster
- Posts: 10744
- Joined: April 27th, 2014, 11:11 am
- Location: Liverpool, England
Re: Using SkiErg with a PowerPlate machine?
Won't the handles on the PowerPlate get in the way when you ski? I've used one a few times quite a long time ago, but I've never known anyone combining them so I can't help with an answer.floatingbones wrote: ↑December 29th, 2024, 10:42 pmHas anyone experimented with standing on a vibration plate machine -- like the PowerPlate MOVE -- while working out on the SkiErg?
51 HWT; 6' 4"; 1k= 3:09; 2k= 6:36; 5k= 17:19; 6k= 20:47; 10k= 35:46 30mins= 8,488m 60mins= 16,618m HM= 1:16.47; FM= 2:40:41; 50k= 3:16:09; 100k= 7:52:44; 12hrs = 153km
"You reap what you row"
Instagram: stuwenman
"You reap what you row"
Instagram: stuwenman
-
- Paddler
- Posts: 26
- Joined: November 30th, 2010, 2:04 pm
Re: Using SkiErg with a PowerPlate machine?
The PowerPlate MOVE doesn't come with a stability bar. It's an option. AFAICT, about half of the vibration plate exercise machines come with a stability bar.Won't the handles on the PowerPlate get in the way when you ski? I've used one a few times quite a long time ago, but I've never known anyone combining them so I can't help with an answer.
-
- Paddler
- Posts: 1
- Joined: December 30th, 2024, 1:00 pm
Re: Using SkiErg with a PowerPlate machine?
How can combining SkiErg with a PowerPlate machine enhance overall strength and endurance in athletes?
Re: Using SkiErg with a PowerPlate machine?
Nobody claimed that it does?steveharvey wrote: ↑January 3rd, 2025, 10:42 amHow can combining SkiErg with a PowerPlate machine enhance overall strength and endurance in athletes?
Skierg and power plate are both not giving great results in gaining strength, so combining them will not change that.
Male - '80 - 82kg - 177cm - Start rowErg Jan 2022
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:26.2
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:26.2
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
-
- Paddler
- Posts: 26
- Joined: November 30th, 2010, 2:04 pm
Re: Using SkiErg with a PowerPlate machine?
What studies are you citing for your "are both not getting great results in gaining strength" conclusion? What studies did you find showing "no results" for that kind of training? Equivocating the lack of published papers with a negative result is a logical fallacy. If you find no papers, all you can really say is, "We don't know. Nobody has studied that." Dismissing the question in the lack of published papers is pseudoskepticism -- false skepticism.
Sakly, the whole field is called "Whole Body Vibration (WBV)", and there is a bunch of peer-reviewed published papers on the topic showing positive results. Go to sciencedirect.com and do a keyword search on
whole-body vibration muscle strength
Here's a link doing that exact search.
Re: Using SkiErg with a PowerPlate machine?
I am not citing any study. It's common sense for me that a machine, which is based on 100s and 1000s repetitions cannot have strength focus.
And a vibrating plate will surely have some influence to muscle work and stimulation, but I can guarantee that it won't enable you squatting 150kg after you trained some month on the power plate. So my conclusion is: no, not giving great results in strength.
I am not talking about rehab training or training for ill people. I am talking about training for normal people and "strength" means "move heavy loads".
To access your link, I need to put in my mail address and I won't do it. Probably you can give a short conclusion of the result from this study, as you have already read it.
And a vibrating plate will surely have some influence to muscle work and stimulation, but I can guarantee that it won't enable you squatting 150kg after you trained some month on the power plate. So my conclusion is: no, not giving great results in strength.
I am not talking about rehab training or training for ill people. I am talking about training for normal people and "strength" means "move heavy loads".
To access your link, I need to put in my mail address and I won't do it. Probably you can give a short conclusion of the result from this study, as you have already read it.
Male - '80 - 82kg - 177cm - Start rowErg Jan 2022
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:26.2
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:26.2
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log