Height with Floor Stand?

[EditorOrion]

Hello there:

Sorry for the trouble. Would anyone happen to know the height of the skierg + floor stand? The dimensions on the site say the stand is 5 inches high, but that might include the wheels. Working with limited heigh and it’s down to inches! Egad.

Thank you!

[Keef]

5”…which site?

is it the C2 products schematics? this one? Floor Stand pdf.
https://www.concept2.com/product/295
its says
Offered in two widths:
Standard—For those needing a more compact setup.
Floor stand base: 23.5 in x 50 in (59.6 cm x 127 cm)
Floor stand installed on SkiErg: 23.5 in x 50 in x 85 in (60 cm x 127 cm x 216* cm)
Wide—Provides an additional 8 in (20.3 cm) of width for those who prefer or need a bit more space. Note: The wide floor stand is wider than many door frames, so please check dimensions carefully depending on your use case.
Floor stand base: 32 in x 52 in (81.3 cm x 132 cm)
Floor stand installed on SkiErg: 32 in x 52 in x 85 in (81.3 cm x 132 cm x 215.9* cm)

My wall mounted SkiErg measures 214cm from the base of the lower plate to the top of the horizontal bracket that holds the cord pulleys. This ignores the wall plate which you wont fit.

If you pixel peep images on net of the floor mount it shows the two wheels (part number 1059/60 Footcaster Assemblies) only touch the ground when the erg is tilted back.
So looking at the quoted total figure of 216cm sound about right. The floor stands at the local gym look around half inch thick…1.25cm.








214cm

[Keef]

yep same specs on the erg frame page
https://www.concept2.com/ergs/skierg

[Keef]

aha. got it...5 inches is 12.5cm… somebody moved the decimal point to the right. should be 1.25cm = 1/2inch