Heart rate on C2
-
- 500m Poster
- Posts: 99
- Joined: January 23rd, 2013, 10:44 pm
Heart rate on C2
What exactly is the C2 recording when it puts down heart rates for splits and workouts? Is it the average HR, max HR during that segment, max HR during a 5-second interval, or what? It's obviously not the minimum, but I can't figure it out.
"You can't outrun a donut." -- TomR
-
- Paddler
- Posts: 8
- Joined: April 16th, 2015, 4:53 am
Re: Heart rate on C2
I have wondered exactly the same thing and I had concluded that it is the HR at the end of the split / interval (which is generally also the max for me). Whereas spm for a split appears to be the average.
Re: Heart rate on C2
How do you get 5 second intervals?
-
- 500m Poster
- Posts: 99
- Joined: January 23rd, 2013, 10:44 pm
Re: Heart rate on C2
I don't do 5-second intervals, but Trainingpeaks will tabulate the maximum heart rate sustained over a 5-second interval, which smooths out a spiky sensor. I don't know if this is what the PM3 is doing or not. Any ideas?
"You can't outrun a donut." -- TomR
Re: Heart rate on C2
I am fairly sure that the monitor shows the HR at the end of each split or interval and that the HR recorded for the entire piece is the average of the split or interval values. That is consistent with the records of my own that I have checked. From what you said above, it apparently uses the last 5 seconds of each split to get the HR recorded for the split. If you use variable intervals, I have a hunch that it still does the same thing - just the last 5 seconds of each interval and that the overall is just an average of those numbers, not taking into account that the intervals are not all equal in length.TheRocketeer wrote:I don't do 5-second intervals, but Trainingpeaks will tabulate the maximum heart rate sustained over a 5-second interval, which smooths out a spiky sensor. I don't know if this is what the PM3 is doing or not. Any ideas?
Bob S.
- Citroen
- SpamTeam
- Posts: 8064
- Joined: March 16th, 2006, 3:28 pm
- Location: A small cave in deepest darkest Basingstoke, UK
Re: Heart rate on C2
The splits logged in memory, logcard or USB stick have an instantaneous HR value from the end of the split.
If you need better data than those you should use some other way of recording HR, like a watch or a phone app or RowPro.
If you need better data than those you should use some other way of recording HR, like a watch or a phone app or RowPro.
-
- 500m Poster
- Posts: 99
- Joined: January 23rd, 2013, 10:44 pm
Re: Heart rate on C2
Gotcha.
Citroen, is Bob correct that the overall heart rate number is the average of the split HR numbers?
Citroen, is Bob correct that the overall heart rate number is the average of the split HR numbers?
"You can't outrun a donut." -- TomR
- Citroen
- SpamTeam
- Posts: 8064
- Joined: March 16th, 2006, 3:28 pm
- Location: A small cave in deepest darkest Basingstoke, UK
Re: Heart rate on C2
Yep. It's less than ideal, but that's how it's always worked for PM2/PM2+/PM3/PM4 & PM5.TheRocketeer wrote:Gotcha.
Citroen, is Bob correct that the overall heart rate number is the average of the split HR numbers?