Using Usb To Serial Converter

[old] Terry Aston · Post by **[old] Terry Aston** » November 13th, 2004, 7:27 am

I have bought a new laptop which only has USB2 ports. I bought a converter to run 'e' row . This works fine to a point except the display on the laptop gets slowly behind the display on the pm2+ monitor. it loses about 3 seconds per minute so the laptop does not replicate what is happening on the monitor. This did not happen with my old laptop (which I've since sold!) Anyone got any ideas - especially as I've set up an internet race for Monday.<br><br>Thanks.

[old] GeorgePalmer · Post by **[old] GeorgePalmer** » November 16th, 2004, 2:56 pm

You could try my software from www.rowtheboat.com and see if that has the same problem. If so you need to look at your hardware. If not it's e-row and I don't fancy your chances of getting it corrected!<br><br>George