Concept2 Forum

The internet-manual on the PM3 told me that there should be a USB-port available to connect to computer for further utilization of the data (I installed RowPro on the computer). Unfortunately the standard USB-cable I bought for that purpose does not fit (it is bigger than the port of the PM3). What is to be done, what cable to be bought?

Get a USB-A to USB-B printer cable.

Thanks Citroen, got it.

Get a good quality one that's the right length and don't force it into the monitor the wrong way around.

The USB cable from Concept 2 was specialised in that it had a large plastic tab on it to help prevent you from trying to plug it in round the wrong way.

If you try and force it the USB socket will come off the board.

Hi,

My gym has a model C rower with PM3.

I have a iphone 5.

would a USB Type A Female to USB Type B Male Adapter such as this one

http://www.amazon.com/HDE-Female-Adapte ... r+adapters

connected into the PM3 USB port and then connected to a standard Iphone USB-lightning cable allow me to collect activity infor into you ERGDATA application ?

Hoping for the best.

Regards…

No. You need a special cable for iPhones.
http://shop-uk.concept2.com/accessories ... n-kit.html

I don't know what C2 are doing now that Apple have incompatibly changed their connector (I'm an Android user anyway).
http://www.concept2.co.uk/service/softw ... quirements

No problem, http://www.apple.com/shop/product/MD823 ... in-adapter
Been that way since introduction of ipad 4 back in ought 12 IIRC.