Page 1 of 1
Adjust splits in online logbook
Posted: January 9th, 2019, 8:25 pm
by carlosr
Allow to change the splits distance (or total splits) for an existing workout in the online logbook. Since the per stroke data is there this shouldn’t be too hard (at least a close enough approximation).
Re: Adjust splits in online logbook
Posted: January 9th, 2019, 9:58 pm
by johnlvs2run
You can sign on to your
log book page, and make any changes that you wish.
Re: Adjust splits in online logbook
Posted: January 9th, 2019, 11:24 pm
by carlosr
How? I don't see anyway to make the change you suggest for rows that are uploaded from ErgData. I can download the data and write a simple program to calculate a different number of splits but I don't see a way to do that from the online logbook itself.
Re: Adjust splits in online logbook
Posted: January 10th, 2019, 1:39 am
by johnlvs2run
There's an edit icon at the end of each workout line in the online logbook.
Re: Adjust splits in online logbook
Posted: January 10th, 2019, 2:22 am
by carlosr
I just looked at your log (from link in your signature). Looks like you are entering your workout manually via web interface. If you do that, sure you can edit them, however you only get to make a single entry for the workout. I am using the ErgData app on my phone to connect to the PM5 which makes the logbook entries for me. Not just that, it also sends the per stroke data and provides graphs for the workout. Check my
logbook to see what I mean (ignore the short cool down entries).
To understand what I am after, take a look at one of my 10k entries. You will see a "Splits" section with a chart showing 5 splits every 2k meters. That is the default. I would like to be able to tell it to calculate 10 splits for example. Granted I could set up the PM5 to do 1k splits for the 10k workout ahead of time and that is what would be displayed in my logbook (I think. I have not tried) but as I said before, the detail for each stroke is there (as you can see from the graph next to the splits) so they should be able to recalculate the Splits chart from that data.
The
ErgData FAQ page says it is compatible with the SkiErg. You may want to give that a try.
Re: Adjust splits in online logbook
Posted: January 10th, 2019, 4:16 am
by Citroen
carlosr wrote: ↑January 9th, 2019, 8:25 pm
Allow to change the splits distance (or total splits) for an existing workout in the online logbook. Since the per stroke data is there this shouldn’t be too hard (at least a close enough approximation).
It can't be done. The splits are set by the PM5 and can't be changed after the workout is finished.
Re: Adjust splits in online logbook
Posted: January 10th, 2019, 4:29 am
by carlosr
Citroen wrote: ↑January 10th, 2019, 4:16 am
It can't be done. The splits are set by the PM5 and can't be changed after the workout is finished.
Why can't it be recalculated from the stroke data? Here is a sampling of a CSV download available from the logbook:
Code: Select all
Number Time (seconds) Distance (meters) Pace (seconds) Watts Cal/Hr Stroke Rate Heart Rate
1 0.8 2.6 161.6 83 585 0 85
2 3.4 11.3 161.6 83 585 0 84
3 6.5 22.1 145.2 114 693 22 84
4 9 30.9 145.2 114 693 22 89
5 11.6 40 143.1 119 710 24 94
6 14.2 49.5 143.1 119 710 24 94
7 16.8 59.3 135.6 140 782 22 94
8 19.4 69.2 131.9 153 824 24 94
9 21.9 79 130.5 157 841 23 94
10 24.5 89 131 156 835 23 94
11 27.1 99.2 128.7 164 864 23 95
12 30.2 111.6 127.6 168 879 22 102
13 32.8 121.8 125.5 177 909 22 102
Obviously the meters are not perfectly aligned with the interval distances (or time for time based workouts) but it should not be hard to do a good enough approximation. Could probably even do it browser client side in javascript to avoid burdening the server.