Concept2 Forum

Loaded the Ver 18 build 14 and the intervals work much better. Noticed something in the 2 days since I loaded it: The heart rate display takes a couple of minutes to appear; sometimes 2 minutes, sometimes 3. It happens when beginning a workout. There used to be a delay but it was only the 10 or 15 seconds for the receiver to start receiving data. I did check my connection since I took the PM3 off the machine to download the update but it works fine after the delay and continues to work through the rest of the workout. Then when reset for cooldown the delay showed up again.<br /><br />Also just noticed something else. I switched a workout after the first piece rowed. When I looked at the data for the single interval it was interesting: The interval split showed 368 m rowed and a split time of 2:02.2. The workout summary at the top showed 369 m and a split of 2:01.9.

Well, that's why it's called a beta I suppose. We'll look into these items and see what we turn up.<br /><br />A question: If you put the PM3 back to a previous Beta or to Ver 82, does you HeartRate stuff come back to life? <br /><br />- Scott

I'll check

Yes...Version 88 Build 14 has a heartrate monitor issue. Something was inadvertently broken in that release. We have fixed the issue and are now doing some testing before posting the next Beta release on the website.<br /><br />Thanks for the feedback and your patience with the inconvenience.<br /><br />Mark