Multiple new issues with PM5 and ErgData

Post bug reports or anomolous operation here
Post Reply
User avatar
otto1965
Paddler
Posts: 6
Joined: December 29th, 2015, 4:15 am

Multiple new issues with PM5 and ErgData

Post by otto1965 » February 22nd, 2024, 3:35 pm

Hello,

I use my RowErg with PM5 and ErgData-App for 7 years now and it worked fine until a few days ago, when erg and app lost connection. I can not connect them any more and noticed, that the PM5 doesn't show an ID when trying to match. In addition I noticed that the light on the PM's backside is shining red. After intensive internet research I did the following:
- removed the iPhone from the case
- logged out from the logbook, closed and restarted the app, logged in again
- resetted the network settings of my iPhone
- made sure there are now other devices connected neither with iPhone nor PM5
- made a complete factory reset of the PM5
- updateted PM5 software, removed USB-stick
- made sure I use the recent ErgData-version
- replaced the batteries despite the old ones still having 72%

None of this measures solved my problem, but I'm pretty sure it's rather a PM5-issue than a ErgData-problem. Anyone here with similar experiences or suggestions? Thank you in advance.

Best regards,

Andreas
______________________________________________________
Andreas, 58years, 182cm, 80kg
Affiliations: Münchner Ruder-Club von 1880, Team German Rowers and Friends United

Image

User avatar
Citroen
SpamTeam
Posts: 8013
Joined: March 16th, 2006, 3:28 pm
Location: A small cave in deepest darkest Basingstoke, UK

Re: Multiple new issues with PM5 and ErgData

Post by Citroen » February 22nd, 2024, 4:18 pm

Have you tried updating the firmware on your PM5?

Get a USB-A to USB-B printer cable, hook the PM5 to your laptop and run the Concept2 Utility program (V7.14) from https://www.concept2.com/service/softwa ... t2-utility

User avatar
Carl Watts
Marathon Poster
Posts: 4690
Joined: January 8th, 2010, 4:35 pm
Location: NEW ZEALAND

Re: Multiple new issues with PM5 and ErgData

Post by Carl Watts » February 22nd, 2024, 6:25 pm

Sounds like the Bluetooth in the PM5 has died.

What version of firmware is the PM5 running ?
Carl Watts.
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log

User avatar
otto1965
Paddler
Posts: 6
Joined: December 29th, 2015, 4:15 am

Re: Multiple new issues with PM5 and ErgData

Post by otto1965 » February 23rd, 2024, 3:25 am

Thanks for your answers. I repeated the firmware-update with USB-cable and the utility confimed that I use the curtrent firmware and no update is needed. Addititional factory reset didn't work either.

PM5 firmware version is 37.
______________________________________________________
Andreas, 58years, 182cm, 80kg
Affiliations: Münchner Ruder-Club von 1880, Team German Rowers and Friends United

Image

User avatar
Carl Watts
Marathon Poster
Posts: 4690
Joined: January 8th, 2010, 4:35 pm
Location: NEW ZEALAND

Re: Multiple new issues with PM5 and ErgData

Post by Carl Watts » February 23rd, 2024, 5:23 am

Its a 1st Gen PM5 so potentially its getting pretty old now.

The PM5 is now on its 4th hardware version, could be time to just get a new one and keep the old one for spare parts or sell it with notification the Bluetooth doesn't work, most people don't use it anyway.

The PM5 has changed a lot over the years, maybe not to the end user who only looks at the display but its now a much better monitor.
Carl Watts.
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log

Post Reply