Time for a new Logcard. . .

ckaiserca · Post by **ckaiserca** » June 4th, 2008, 12:34 pm

My logcard is showing that it is 74% full, but it is not recording workouts when done as "Just Row".

I rowed for more than an hour today on a "Just Row" and nothing shows up on the logcard or on the PM4 itself. To test, I did another couple hundred meters and again nothing. A preset 1K row recorded with no problem.

BobD · Post by **BobD** » June 4th, 2008, 3:28 pm

Which firmware on your , I assume, PM3? Which logcard utility are you using, 6.20?

BobD · Post by **BobD** » June 5th, 2008, 10:03 am

Oops I see it's a PM4

, but you should still update to the latest firmware if you haven't done so already and the Logcard Utility as well.

c2scott · Post by **c2scott** » June 5th, 2008, 11:54 am

I suggest you contact me (Scott Hamilton) at Concept2 for assistance.
- Scott