Concept2 Forum

Hi all,

I've had my Model C with PM2+ for over 10 years, and have used it off and on, but this year I've been rowing 30km each week (4x5Km, 1x10km) and have racked up 760km. But, when viewing the odometer (OK + right arrow) it displays just 632, I've done more than what the odometer states just in the last 7 months. It's not a big issue, I'm just surprised as I thought the odometer could not be reset.

Any ideas?

Mark (sticky)

The PM2 has two odometers. One is resettable, one isn't.

http://www.concept2.com/service/monitor ... -odometers

Actually both Odometers reset after you use the "four finger" reset.

I know there are two, and I know that one of them can be reset. I used the right arrow + OK, which displays the non-resettable one.

If it's true that both can indeed be reset then this probably explains the issue. Although I haven't reset them in the last year.

One is in total metres the other is total Km's from memory so they are never the same.

The 4 finger reset erases the EEPROM memory and your back to zero after it counts 4 or 5 times to 256 and you can then test each key is working before turning the unit off.

This can clear temporary errors like the E011 but it typically comes back with time.