When I press and hold Manu button to turn off PM5, press any button can not wake up PM5.
If remove the battery then install battery directly, PM5 show: PM Init Error:201.
Remove the battery and reset PM5, then install battery. PM5 screen will power on again, the time and date need to be reset.
If PM5 power off, the problem gonna be happen again.
USB Cable linked PM5 and computer, no response on PM5, concept2 UTILITY show: no equipment connected
Use USB flash disk to install firmware by concept2 UTILITY, insert the USB flash disk to PM5, there is no response or prompt, nothing happened.
I can't update PM5 firmware.
Has anyone experienced the same problem?
PM5 Error
Re: PM5 Error
It works both ways. I also use the long press to turn off the PM5.
Male - '80 - 82kg - 177cm - Start rowErg Jan 2022
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:39.6
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:39.6
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My log
Re: PM5 Error
Thanks for your advice, I press the menu button 4 times, the screen turn off, but I still can't wake up screen by press any button.
the issue is still exist.
Re: PM5 Error
What does C2 say about that?PM Init Error:201.
Sales and Customer Service: 802.888.7971
Fax: 802.888.4791
Email: Oars, Indoor Rower, SkiErg, BikeErg and General Inquiries: info@concept2.com
If you don't want to get a new PM***, use the erg as is.
A clock that shows seconds can help keep the rating at around 20, a stroke every three seconds. Pull long strokes hard and fast with the legs, with plenty of rest in between, but not so hard that you can't reach 10-20 minutes a day after warm-up.
*** If you do get a new PM, tell C2 what machine your are using: type C or D. The sensor systems differ.
Maybe also try using a power supply with a printer type cable.
08-1940, 179cm, 83kg.