Logcard required to upload data from PM4 to LogBook?

limewater · Post by **limewater** » January 4th, 2022, 8:03 pm

Is there any way to upload data from the PM4 memory to the Logbook? The concept 2 utility only gives three options: USB, PM5 Memory, or Logcard.

Citroen · Post by **Citroen** » January 5th, 2022, 9:22 am

Connect the PM4 with a printer (USB-A to USB-B) cable and see if that changes the options in the utility.

limewater · Post by **limewater** » January 5th, 2022, 12:21 pm

Citroen wrote: ↑
January 5th, 2022, 9:22 am
Connect the PM4 with a printer (USB-A to USB-B) cable and see if that changes the options in the utility.

I tried that. It did register that a device was connected but nothing changed in the options for uploading.

nates · Post by **nates** » January 5th, 2022, 10:06 pm

My PM3 is doing the same. Up to date software. It appears you need a card in order to upload from memory.

Concept2 Forum