PM2 replacement LCD

[mjb152]

Hi, I've got a model C with a Pm2 and the LCD screen is damaged.

its an LCD with 64 pins each side, so PN1405 , and I'm struggling to find a replacement part.

I presume I couldnt use PN1416 as a replacement as there aren't enough pins...

anyone know if these parts are still available ?

[ckostie]

I am about to recycle the PM2+ (have a PM5 now) that came with my model C. There was some battery leakage and the monitor no longer works. I don't know if the LCD works or not, but if you are interested in it let me know.

[Carl Watts]

So the PM2 had TWO different LCD displays.

You use the Revision number printed inside the battery compartment.

No revision number printed, its the first version of the PM2, this display is obsolete and no longer available. I call these the CAP-E version as that about all that was printed on the board if you take the rear cover off.

Revision 1.6, 1.7, 2.0, 2.1 and 2.3 uses a different version that is still available new from Concept 2 when I last checked.

The two are not interchangeable.