Page 1 of 1
Polar A370 and PM5 Connection
Posted: January 4th, 2019, 4:39 pm
by rudm
I wanted to get a heart monitor to work with my rower's PM5 so got a Polar A370 which has Bluetooth Smart. But the PM5 doesn't see it when I select for monitors and/or wireless.
My phone does see both the A370 and the PM5.
Any suggestions?
Re: Polar A370 and PM5 Connection
Posted: January 12th, 2019, 10:58 am
by rakserv
do you have the A370 in heart rate sensor broadcasting mode when you’re attempting to pair it with the PM5?
https://support.polar.com/e_manuals/A37 ... essory.htm
I have a polar vantage m & polar h10 heart rate sensor (Bluetooth - supposed to work with 2 Bluetooth targets simultaneously)
- it does take quite a while for the polar h10 Bluetooth device to show up on the heart rate connect menu
- wahoo ant+ connects much faster
with the h10:
I have been able to connect to the PM5
OR
the vantage m
but not both as it is supposed to.
Re: Polar A370 and PM5 Connection
Posted: January 18th, 2019, 1:46 am
by rudm
Yes, I had it set to broadcast. Returned it to Amazon. Got a Garmin Forerunner 35 but can't get it to connect, either, but only made one attempt so far. The ANT+ web site says it works.
Re: Polar A370 and PM5 Connection
Posted: January 26th, 2019, 3:14 pm
by SolidFloyd
rakserv wrote: ↑January 12th, 2019, 10:58 am
with the h10:
I have been able to connect to the PM5
OR
the vantage m
but not both as it is supposed to.
To be able to connect the H10 to two devices you'll need to activate the "2 receiving BLE devices" functions - this can be done in the Polar Beats app.
https://support.polar.com/us-en/support ... al_devices
(You may need to update the H10 firmware to get the "2 receiving BLE devices" function to show in the Polar Beats app - updating firmware can also be done in the Polar Beats app)
Re: Polar A370 and PM5 Connection
Posted: January 26th, 2019, 10:39 pm
by rakserv
SolidFloyd wrote: ↑January 26th, 2019, 3:14 pm
rakserv wrote: ↑January 12th, 2019, 10:58 am
with the h10:
I have been able to connect to the PM5
OR
the vantage m
but not both as it is supposed to.
To be able to connect the H10 to two devices you'll need to activate the "2 receiving BLE devices" functions - this can be done in the Polar Beats app.
https://support.polar.com/us-en/support ... al_devices
(You may need to update the H10 firmware to get the "2 receiving BLE devices" function to show in the Polar Beats app - updating firmware can also be done in the Polar Beats app)
Thanks!
Re: Polar A370 and PM5 Connection
Posted: January 27th, 2019, 7:22 pm
by rakserv
i usually do RTM ... but I don’t use polar beat
I was able to get my H10 to pair with my vantage m & the PM5 ... all good now
thanks again
Re: Polar A370 and PM5 Connection
Posted: February 28th, 2019, 10:07 am
by Soleith
rakserv wrote: ↑January 12th, 2019, 10:58 am
do you have the A370 in heart rate sensor broadcasting mode when you’re attempting to pair it with the PM5?
https://support.polar.com/e_manuals/A37 ... essory.htm
I have a polar vantage m & polar h10 heart rate sensor (Bluetooth - supposed to work with 2 Bluetooth targets simultaneously)
- it does take quite a while for the polar h10 Bluetooth device to show up on the heart rate connect menu
- wahoo ant+ connects much faster
with the h10:
I have been able to connect to the PM5
OR
the vantage m
but not both as it is supposed to.
Ah interesting, I'm thinking of getting a Vantage M to use as a HR monitor. I use the ergdata app from the PM5 to my phone, are you able to use the ergdata app bluetoothed to the pm5 and also the vantage m wirelessly to the PM5 for HR at the same time do you know?
Re: Polar A370 and PM5 Connection
Posted: May 21st, 2019, 11:52 pm
by rakserv
Soleith wrote: ↑February 28th, 2019, 10:07 am
rakserv wrote: ↑January 12th, 2019, 10:58 am
with the h10:
I have been able to connect to the PM5
OR
the vantage m
but not both as it is supposed to.
Ah interesting, I'm thinking of getting a Vantage M to use as a HR monitor. I use the ergdata app from the PM5 to my phone, are you able to use the ergdata app bluetoothed to the pm5 and also the vantage m wirelessly to the PM5 for HR at the same time do you know?
apologize for the delayed response: i haven't been checking the board lately
i have never tried to use the Polar Vantage M as a heart rate transmitter.
the polar h10 recently updated firmware and enabled ANT+ transmitter, so i am now using the h10 with the PM5, Ergdata and Polar Vantage M