Maintenance, accessories, operation. Anything to do with making your erg work.
-
Ombrax
- 10k Poster
- Posts: 1758
- Joined: April 20th, 2013, 2:05 am
- Location: St Louis, MO, USA
Post
by Ombrax » November 25th, 2023, 7:32 am
Gmass wrote: ↑November 25th, 2023, 4:20 am
I did not change my technique for sure and I had already used rowers in fitness clubs before along with getting trainer pieces of advice. This doesn't imply I'm a perfect rower though...
It isn't a technique issue. Originally folks thought the problem was the chain rubbing at the chain guide on the top side of the erg, before the chain gets to the sprocket. Issues there are due to technique. Problems on the lower side are due to some sort of interference, either due to the location of the long plastic piece or a part of the pulley / bungee / chain system. The fact that things are fixed once you reassembled it suggests that in doing so you got everything back to where it should be. (or at least where the interference and resulting noise is gone)
Enjoy!
-
mromero680
- 500m Poster
- Posts: 95
- Joined: April 19th, 2020, 5:40 pm
Post
by mromero680 » November 26th, 2023, 11:14 am
Not sure why it started rubbing after all the years I've had it but the plastic strip was bowed so I flipped it over and no more rubbing.
60 5'10"/HWT
500m: 1:36.9/ 2k: 6:59.2 / 5k: 18:53.2 / 30min: 7762 / 10k: 38:52.0 (2020 PBs)
-
Telorast
- Paddler
- Posts: 8
- Joined: December 2nd, 2023, 5:42 pm
Post
by Telorast » December 2nd, 2023, 5:55 pm
Gaaak!!! I got my RowErg yesterday. Thought the white plastic strip was package protection for shipping! ...heading out to search the recycle bin
-
Ombrax
- 10k Poster
- Posts: 1758
- Joined: April 20th, 2013, 2:05 am
- Location: St Louis, MO, USA
Post
by Ombrax » December 3rd, 2023, 8:28 pm
Telorast wrote: ↑December 2nd, 2023, 5:55 pm
Gaaak!!! I got my RowErg yesterday. Thought the white plastic strip was package protection for shipping! ...heading out to search the recycle bin
That's one way to be sure that it never rubs...
(Welcome to the forum!)
-
Gmass
- Paddler
- Posts: 10
- Joined: November 23rd, 2023, 12:27 pm
Post
by Gmass » December 4th, 2023, 4:05 am
Ombrax wrote: ↑December 3rd, 2023, 8:28 pm
Telorast wrote: ↑December 2nd, 2023, 5:55 pm
Gaaak!!! I got my RowErg yesterday. Thought the white plastic strip was package protection for shipping! ...heading out to search the recycle bin
That's one way to be sure that it never rubs...
(Welcome to the forum!)
It's a way, right! But I guess this mostly protects against dust?
-
JaapvanE
- 10k Poster
- Posts: 1337
- Joined: January 4th, 2022, 2:49 am
Post
by JaapvanE » December 4th, 2023, 4:08 am
Gmass wrote: ↑December 4th, 2023, 4:05 am
Ombrax wrote: ↑December 3rd, 2023, 8:28 pm
Telorast wrote: ↑December 2nd, 2023, 5:55 pm
Gaaak!!! I got my RowErg yesterday. Thought the white plastic strip was package protection for shipping! ...heading out to search the recycle bin
That's one way to be sure that it never rubs...
(Welcome to the forum!)
It's a way, right! But I guess this mostly protects against dust?
And oil spillage from the chain onto the floor.
-
Telorast
- Paddler
- Posts: 8
- Joined: December 2nd, 2023, 5:42 pm
Post
by Telorast » December 4th, 2023, 2:40 pm
Not to mention cat feet... My 2 are fascinated by the flywheel. Glad they can't see the chain!
BTW, the plastic strip slid back into position with no problem. Glad I stumbled across this post!
-
Gmass
- Paddler
- Posts: 10
- Joined: November 23rd, 2023, 12:27 pm
Post
by Gmass » December 4th, 2023, 2:44 pm
You're welcome
-
RichBinAZ
- Paddler
- Posts: 37
- Joined: September 17th, 2020, 1:58 pm
Post
by RichBinAZ » December 7th, 2023, 11:16 am
The white plastic protector is there for when you over oil the chain - done it a couple of times now.
It guides the excess oil down to a low spot so it drips on your $40/sq ft carpet in one spot only.
It's why I keep a piece of hardboard under that part of the rower.
I'm sure the real reason is to hide moving parts from inquisitive fingers or claws. Same as the black cover on the front.
-
Ombrax
- 10k Poster
- Posts: 1758
- Joined: April 20th, 2013, 2:05 am
- Location: St Louis, MO, USA
Post
by Ombrax » December 7th, 2023, 6:13 pm
Do you guys wipe down the chain after adding lube? That should minimize drips or splatter.
-
mict450
- 6k Poster
- Posts: 899
- Joined: December 23rd, 2019, 3:11 pm
- Location: the good, ol' U S of A
Post
by mict450 » December 7th, 2023, 6:21 pm
RichBinAZ wrote: ↑December 7th, 2023, 11:16 am
It guides the excess oil down to a low spot so it drips on your $40/sq ft carpet in one spot only.
It's why I keep a piece of hardboard under that part of the rower.
Thanks for that tip, Rich. I checked under mine and, fortunately for me, no tell-tale spot. Just for my piece of mind, I'll put some type of stealth protector under the erg. SWMBO would do some surgery on me I would find highly unpleasant if such a spot were found!
Eric, YOB:1954
Old, slow & getting more so
Shasta County, CA, small town USA
-
Sakly
- Half Marathon Poster
- Posts: 3452
- Joined: January 13th, 2022, 10:49 am
Post
by Sakly » December 8th, 2023, 2:02 am
Ombrax wrote: ↑December 7th, 2023, 6:13 pm
Do you guys wipe down the chain after adding lube? That should minimize drips or splatter.
Using some spray oil, so putting a towel below chain and apply only small portions. Then wiping the chain afterwards to get rid of the extend.
As I have a rubber floor, it wouldn't bother me if some oil would splatter on the floor. Rower is placed in the basement exclusively used for workout.
Male - '80 - 82kg - 177cm - Start rowErg Jan 2022
1': 358m
4': 1217m
30'r20: 8068m
30': 8,283m
60': 16,222m
100m: 0:15.9
500m: 1:26.0
1k: 3:07.8
2k: 6:37.1
5k: 17:39.6
6k: 21:03.5
10k: 36:01.5
HM: 1:18:40.1
FM: 2:52:32.6
My
log
-
Dangerscouse
- Marathon Poster
- Posts: 10632
- Joined: April 27th, 2014, 11:11 am
- Location: Liverpool, England
Post
by Dangerscouse » December 8th, 2023, 4:30 am
Ombrax wrote: ↑December 7th, 2023, 6:13 pm
Do you guys wipe down the chain after adding lube? That should minimize drips or splatter.
Tbh, maybe I'm doing something wrong but I don't put enough 3 in 1 oil on for it to drip. It's probably about half a teaspoon I put on.
51 HWT; 6' 4"; 1k= 3:09; 2k= 6:36; 5k= 17:19; 6k= 20:47; 10k= 35:46 30mins= 8,488m 60mins= 16,618m HM= 1:16.47; FM= 2:40:41; 50k= 3:16:09; 100k= 7:52:44; 12hrs = 153km
"You reap what you row"
Instagram: stuwenman
-
MPx
- 10k Poster
- Posts: 1304
- Joined: October 30th, 2016, 1:38 pm
- Location: Somerset, UK
Post
by MPx » December 8th, 2023, 4:35 am
I spray on and then wipe with a cloth. This spreads out the oil over every part of the surface and stops any excess drips - never had any drips on the floor.
Mike - 67 HWT 183
-
JaapvanE
- 10k Poster
- Posts: 1337
- Joined: January 4th, 2022, 2:49 am
Post
by JaapvanE » December 8th, 2023, 4:41 am
MPx wrote: ↑December 8th, 2023, 4:35 am
I spray on and then wipe with a cloth.
What ould do you use? I have to drip oil on a cloth and that always is a mess.