PM 3 Question
-
- Paddler
- Posts: 16
- Joined: August 10th, 2013, 12:29 pm
PM 3 Question
Hello, I recently purchased a used model d with a pm 3. The monitor says 0 lifetime meters when I look at the information section of the monitor. I rowed some then looked again and it is still at 0 lifetime meters. Is this normal?
- Citroen
- SpamTeam
- Posts: 7994
- Joined: March 16th, 2006, 3:28 pm
- Location: A small cave in deepest darkest Basingstoke, UK
Re: PM 3 Question
That's abnormal. Is it configured for the right model of rower?
Try updating it by running http://software.concept2.com/pm3firmwar ... 1Setup.exe first then running the C2 Utility to get it to the latest firmware.
Try updating it by running http://software.concept2.com/pm3firmwar ... 1Setup.exe first then running the C2 Utility to get it to the latest firmware.
- Carl Watts
- Marathon Poster
- Posts: 4667
- Joined: January 8th, 2010, 4:35 pm
- Location: NEW ZEALAND
Re: PM 3 Question
The Odometer doesn't work well on the older version firmware or if you have a LogCard in it.
Update to the latest firmware and it works fine.
Update to the latest firmware and it works fine.
Carl Watts.
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log