Hi all,
I've had my Model C with PM2+ for over 10 years, and have used it off and on, but this year I've been rowing 30km each week (4x5Km, 1x10km) and have racked up 760km. But, when viewing the odometer (OK + right arrow) it displays just 632, I've done more than what the odometer states just in the last 7 months. It's not a big issue, I'm just surprised as I thought the odometer could not be reset.
Any ideas?
Mark (sticky)
PM2+ odometer incorrect
- Citroen
- SpamTeam
- Posts: 8039
- Joined: March 16th, 2006, 3:28 pm
- Location: A small cave in deepest darkest Basingstoke, UK
Re: PM2+ odometer incorrect
The PM2 has two odometers. One is resettable, one isn't.
http://www.concept2.com/service/monitor ... -odometers
http://www.concept2.com/service/monitor ... -odometers
- Carl Watts
- Marathon Poster
- Posts: 4703
- Joined: January 8th, 2010, 4:35 pm
- Location: NEW ZEALAND
Re: PM2+ odometer incorrect
Actually both Odometers reset after you use the "four finger" reset.
Carl Watts.
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log
Re: PM2+ odometer incorrect
I know there are two, and I know that one of them can be reset. I used the right arrow + OK, which displays the non-resettable one.
If it's true that both can indeed be reset then this probably explains the issue. Although I haven't reset them in the last year.
If it's true that both can indeed be reset then this probably explains the issue. Although I haven't reset them in the last year.
- Carl Watts
- Marathon Poster
- Posts: 4703
- Joined: January 8th, 2010, 4:35 pm
- Location: NEW ZEALAND
Re: PM2+ odometer incorrect
One is in total metres the other is total Km's from memory so they are never the same.
The 4 finger reset erases the EEPROM memory and your back to zero after it counts 4 or 5 times to 256 and you can then test each key is working before turning the unit off.
This can clear temporary errors like the E011 but it typically comes back with time.
The 4 finger reset erases the EEPROM memory and your back to zero after it counts 4 or 5 times to 256 and you can then test each key is working before turning the unit off.
This can clear temporary errors like the E011 but it typically comes back with time.
Carl Watts.
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log
Age:56 Weight: 108kg Height:183cm
Concept 2 Monitor Service Technician & indoor rower.
http://log.concept2.com/profile/863525/log