Concept2 Forum

Probably don’t need a private coach. If you have a decent coach for his team, ask them for advice. If you don’t, I would think that lots of steady state work (70% of max heart rate - ignore rowing splits, just keep a steady heart rate) would greatly benefit him. This will be a significant time inves...

Is there a reason you made the video private? It makes this worthless for others to learn too.

Seems to be fixed. It’s a easy replacement. Hardest part is getting the crank arm off!

Is there a way to connect to ergdata and zwift simultaneously? I saw c2jon mention that he was using both at the same time. I can get either one or the other to connect but never both.

The replacement bearing assembly was installed just now. I did a quick test ride and didn’t hear any of the “clunking” noise. I’ll do a more thorough test tomorrow and verify that this did solve the problem.

Update for anyone else experiencing similar symptoms: the folks in product support said that it can be caused by one of two issues - crank bolt too loose or there is an updated bearing (the silver piece behind the crank arm). Mine was not a crank arm tightness issue so they are sending out a replace...

I am getting a fairly consistent “clunking” noise while pedaling the BikeErg. It seems to be related to the drivetrain as the noise stops when I stop pedaling. It is periodic (one clunk per pedal rotation). I have rechecked the crank arms and they are properly tightened.

What else should I check?