Concept2 Forum

Thank you for the advice. I'll go trying too straighten it, and if it doesn't work i'll
contact C2 over here.
Thanks again!

I had the same ? experience in the past. The problem was the plexi slide at the u-channel that didn't fit well. At one side it was resting on a nut and on the other side resting on the frame. That made a 1 centimeter diference in height. I made it fit better and the noise was gone. Hope this is of a...

Thank you.

(after having made my posting i found out about the magnetic disc/ rotor) I'll contact C2 in the Netherlands to ask
for a new one.

Question remains .. can it be straithened.

Regards,
Hans

Long time no see;-) Since a couple of months i am the proud owner of a very rare model A with a Pm1 upgrade :) But .. the Pm1 is inaccurate, the pace is never constant. On the 'bikewheel' a round plastic, i asume a magnet, is mounted with 2 very small screws. The plastic has bent over the years, due...

thank you!

The flywheel of my D rower has got ten, repeat 10, balancing weights i found out when
cleaning the flywheel.
I learned About balancing the wheels of my car that seldom more then 50 grams each Side is
needed. If a lot more lead was needed then..
Is this within production tolerance or ..

Thank you Lindsayh.

Carl,
Thank you so much for taking Your time to answer this old message. I Pm'd you About this a year ago, uninvited, and now you answer. I am so grateful.
Maybe i'll come back later to you on this issue.
Again,
Thank you.
Hans

Thank you Citroën for Your positive comments. Didn't expert that;-). Yes, i cleaned the 'gold' contacts and a little on the other Side of the board with ipa. Didn't work. Many thanks again. Thank you Carl, i'll try once again with ipa. The contacts and a little more intensive the other Side of the b...

Has one ever come across the following?

My Pm3 monitor works fine when rowing and also when connected with a usb cable to my computer, but ..
it doesn't power on when just pressing the buttons ?

Thanks in advance,
Hans

didn't know what bumping a topic meant, so i accidently 'posted' an old message

I am working on a PM2 Rev. 2.1 for a long time now.. Lot of cleaning with vinegar, drying with the hairdryer and cleaning a lot of copper tracks. Must have spent more then 12 hours already. First the PM2 did nothing at all, but after doing the activities as told above, it started working. Then i fou...

Thans for putting me in the right track! I found out that the soldering of the r25, the left part seen as the battery stations are above, was completely gone as well as a part of the copper connection to c8. I soldered the foot of the r25 including, in that soldering, the connection with c8. And now...

Hello, Here a question about a pm2+ with leakage problem, posted from Holland. I am working on the pm2+ monitor; already changed the R24 and still the meters stay on zero when rowing. I don't trust the yellow 686 5k (by head) can anybody tell me how to 'lift' it from the board ? I replaced the 1000 ...